In this experiment, NexlON 5000 multi quadrupole ICP-MS was used to analyze nanoparticle contamination in 1% sulfuric acid to demonstrate its suitability for routine laboratory analysis of process chemicals used in the semiconductor industry.

Using PerkinElmer FL 6500 ™ Fluorescence spectrometer monitoring NanoOrange ® Fluorescence enhancement was observed during non covalent interactions between fluorescent groups and BSA, and a standard curve was constructed.

Dichloromethane, trichloromethane, and hexachlorobutadiene will be included in China's "Key Control New Pollutant List (2023 Edition)" in 2023. This article refers to GB/T 5750.8 "Standard Test Methods for Drinking Water Part 8: Organic Matter Indicators" and uses a PerkinElmer TurboMatrix 40 headspace sampler and GC 2400 ™ Gas chromatography was used to analyze and determine dichloromethane, trichloromethane, and hexachlorobutadiene.

PerkinElmer uses the QSight 220 dual ion source liquid chromatography-mass spectrometry system to determine triclosan in its environmental water using an APCI source. No solvent conversion is required, and the sample can be directly filtered and analyzed to obtain excellent sensitivity, eliminating the tedious pretreatment process and obtaining accurate results.

This article refers to HJ 676-2011 "Determination of Phenolic Compounds in Water Quality - Liquid Liquid Extraction/Gas Chromatography Method", using PerkinElmer GC 2400 ™ Gas chromatography is used to analyze and determine phenolic compounds.

This project uses the Perkin Elmer NexION equipped with full matrix solution (AMS) online gas dilution function ® 1100G ICP-MS， Discussed the determination of Cl in LNCM.

This application article reports the use of PerkinElmer GCMS 2400 ™ The results of the analysis of 76 organochlorine, organic nitrogen, organic phosphorus pesticides and related isomers using the system and PerkinElmer Elite 5MS capillary column.

Thermogravimetric analysis is a method of measuring the weight of a sample during the heating process. In this article, we will use thermogravimetric analysis to determine key information about unknown polymers.

This article introduces the analysis method of using Perkin Elmer Avio 200 inductively coupled plasma optical emission spectrometer (ICP-OES) to determine various impurity elements in high-purity quartz sand samples, and systematically validates the method.

In this paper, Perkin Elmer GCMS2400 gas chromatography-mass spectrometer was used to accurately determine the content of tetramethylpyrazine in Baijiu by selecting the ion monitoring (SIM) method, which has important significance for the Baijiu industry to continuously explore the impact of various process parameters on the formation of tetramethylpyrazine, optimize its process to increase the content of tetramethylpyrazine, and monitor the change of tetramethylpyrazine content in the whole process

In this paper, a rapid and efficient detection method was developed to accurately analyze and determine bisphenols and their metabolites in Baijiu by using the QSight series liquid chromatography-mass spectrometry system of Perkin Elmer under the electric spray ionization mode, with positive and negative switching simultaneous determination, and excellent sensitivity and repeatability were obtained, with accurate and reliable results.

Photoresist is currently an important functional material in the semiconductor industry. Photoresist can be classified based on the type of its main monomers, and the identification of monomers can quickly determine their type. In addition to monomers, the components that affect their application properties also include solvents, initiators, photoreceptors, etc. Generally speaking, these components will be adjusted according to the application scenarios of latex. PerkinElmer's thermogravimetric infrared gas chromatography-mass spectrometry (TG-IR-GC-MS) triple unit can accurately identify the components of slightly complex samples, evaluate their photochemical properties and application scenarios, and provide data-driven support for some reverse engineering applications.