Portable oil quality rapid detector

1、 Product Introduction

Safety, reliability, and service life. Traditional oil analysis relies on laboratory testing, which has problems such as long cycles, high costs, and delayed responses, making it difficult to support rapid on-site decision-making. However, in the early stages of oil degradation, there are often no obvious signs. If problems such as water infiltration, oxidation deterioration, pollution, or depletion of additives cannot be detected in a timely manner, it can easily lead to equipment wear, overheating, and even catastrophic failures.In order to meet the needs of efficient, accurate, and low-cost oil monitoring on site, portable oil quality rapid detection devices have emerged.

Portable oil quality rapid detectorBy adopting tuning fork sensing technology and micro rapid heating temperature control technology, precise temperature control of 40 ℃/100 ℃ can be achieved. It is composed of ARM high-performance processor, fluid characteristic sensor, 7-inch resistive touch LCD, USB interface, constant temperature device, built-in power supply, printer, etc. By taking samples of lubricating oil in use, the kinematic viscosity, density, dielectric constant (oil quality), temperature, water activity, and water content parameters of the lubricating oil can be conveniently, quickly, and stably measured. Accurately measuring various physical and chemical indicators of oil degradation, providing evaluation basis for rapid assessment of the lubrication health status of equipment on site, achieving scientific oil replacement according to quality with low-cost and simple methods, prolonging the use time of lubricating oil, early detection of equipment failures, and avoiding major losses.

2、 Functional Features

High measurement accuracy: The measurement accuracy is highly consistent with large laboratory instruments and equipment, with built-in heating modules that provide accurate measurement of physical and chemical indicators of oil at standard temperatures of 40 ℃ and 100 ℃

2. Easy to operate: The touch screen and its operation prompts assist in completing the entire measurement process. With a Chinese interface, users only need to prepare an oil sample and follow the operation guide prompts to read out the results.

3. Compact and lightweight, powered by lithium batteries, with no high voltage hazards for operation and instruments. Equipped with a built-in battery (with a working time of no less than 4 hours), it is easy to carry and can quickly measure the quality of oil products on site

4. Trend analysis can be conducted to observe changes in the physical and chemical indicators of oil products;

5. Real time display of oil status.

6. Built in memory for convenient data storage

3、 Technical parameters

4、 Technical parameters of sensors