Lubricating oil temperature density detector

1、 Product Introduction

In the lubrication management and condition monitoring of industrial equipment, the temperature and density of lubricating oil are two key fundamental physical parameters. Temperature directly affects the viscosity, fluidity, and oxidation rate of oil products, and is an important indicator for determining whether equipment is overloaded and whether the cooling system is normal; And density can reflect the degree of aging, pollution status (such as moisture, fuel dilution, or particle impurities mixed in), and whether abnormal situations such as oil mixing have occurred in the oil product. Although measuring any parameter individually is valuable, if temperature and density data can be obtained simultaneously and analyzed comprehensively in combination with operating conditions, it can significantly improve the accuracy and foresight of oil state assessment.

To this end,Lubricating oil temperature density detectoremerge as the times require. This instrument integrates high-precision temperature sensors and digital density measurement modules (usually based on the resonant principle of oscillating tubes or tuning forks), which can perform rapid, non-destructive, and synchronous detection of lubricating oil in use on site. The device is equipped with intelligent temperature control and compensation algorithms to ensure reliable data output that meets standards such as ASTM D4052 and GB/T 1884 under different environmental conditions. Typical configurations include ARM processor, 7-inch touch screen, thermostat, USB/Bluetooth interface, built-in battery, and portable structure, supporting real-time display, data storage, and export.

Lubricating oil temperature density detectorOnly a small amount of oil sample is needed, and the measurement can be completed within minutes. It is widely used in fields such as power, petrochemicals, metallurgy, rail transportation, ships, and large engineering machinery. By synchronously monitoring the trend of temperature and density changes, operation and maintenance personnel can timely identify risks such as oil deterioration, abnormal cooling, fuel dilution, or water intrusion, providing scientific basis for "oil replacement according to quality", fault warning, and predictive maintenance, effectively extending equipment life, reducing unplanned downtime and maintenance costs, and is an efficient on-site detection tool in modern intelligent lubrication management systems.

2、 Functional Features

High measurement accuracy: The measurement accuracy is highly consistent with large laboratory instruments and equipment, with built-in heating modules that provide accurate measurement of physical and chemical indicators of oil at standard temperatures of 40 ℃ and 100 ℃

2. Easy to operate: The touch screen and its operation prompts assist in completing the entire measurement process. With a Chinese interface, users only need to prepare an oil sample and follow the operation guide prompts to read out the results.

3. Compact and lightweight, powered by lithium batteries, with no high voltage hazards for operation and instruments. Equipped with a built-in battery (with a working time of no less than 4 hours), it is easy to carry and can quickly measure the quality of oil products on site

4. Trend analysis can be conducted to observe changes in the physical and chemical indicators of oil products;

5. Real time display of oil status.

6. Built in memory for convenient data storage

3、 Technical parameters

4、 Technical parameters of sensors