Medical infusion pump and infusion pump tester

NegotiableUpdate on 12/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Rigel Multi Flo: Application scope: Multi Flo infusion equipment analyzer can provide real-time flow monitoring (instantaneous, average flow rate, cumulative volume, etc.), blockage alarm monitoring, analgesic pump dosage monitoring, and human back pressure simulation function. Due to the need for a certain time window to stabilize traffic during traffic testing, users can choose to configure 1, 2, or 4 sets of test channels to improve testing efficiency. Each set of test channels is independent, allowing for simultaneous analysis of multiple devices to save testing time.

Product Details

Rigel Multi Flo Medical Injection PumpInfusion pump tester:

Application scope:

The Multi Flo infusion equipment analyzer can provide real-time flow monitoring (instantaneous, average flow rate, cumulative volume, etc.), blockage alarm monitoring, analgesic pump dosage monitoring, and human back pressure simulation functions.

Due to the need for a certain time window to stabilize traffic during traffic testing, users can choose to configure 1, 2, or 4 sets of testing channels to improve testing efficiency. Each set of testing channels is independent, allowing for simultaneous analysis of multiple devices to save testing time and provide possibilities for future upgrades and expansions.

医用注射泵和输液泵测试仪

When designing equipment, specialized infusion devices such as injection pumps and PCA pain pumps with precise infusion requirements for small flow rates and small drug doses are tested, with a volume resolution of only 10 microliters (the typical volume of deionized water droplets is approximately 40 microliters). For an injection micro pump set to a flow rate of 5ml/hr, the first set of analysis data can be obtained in about 8 seconds, ensuring fast and accurate measurement of instantaneous flow rate.

医用注射泵和输液泵测试仪

The device has a large color graphic display screen that can present data in both digital and graphic formats, with a clear visual distance of over 3 meters

The inlet and outlet are both designed on the front panel, making connection and operation very convenient

The device is equipped with a background pressure control unit that can set the end pressure of the pipeline from -200 to 600mmHg. This function can complete the evaluation of the impact of blood pressure in the human body on the infusion of the pump

Through Rigel's testing solution software Med eBase, remote (PC) control interfaces can be implemented, allowing the functionality of Multi Flo analyzers to be controlled from a computer. Each device only requires one USB connection, allowing users to connect multiple sets of test channels, thereby increasing the testing capacity in high-capacity testing environments.

医用注射泵和输液泵测试仪

function	application
Real time traffic measurement	Routine analysis of infusion devices
Human back pressure simulation	Calibration of infusion equipment
Blocking alarm	Production line testing and inspection of infusion equipment
Statistical Data - Horn Curve Analysis (Med eBase required)	Development tool for infusion equipment research and development
Download raw data to MS Excel (requiring Med eBase)	Infusion equipment testing tool
Customizable testing templates	Assessment tools for specific applications
	administration set

Product Introduction: A fast testing tool for performance analysis of infusion devices

Medical infusion pump and infusion pump testerRigel Multi Flo Technical Parameters:

flow measurement
display range	0.010 to 1500 milliliters per hour
display resolution	＞ 10 μ L/hour
measurement range	0.100 to 1450 milliliters per hour
Traffic accuracy
0.1-9.9ml/hour	1% of reading+0.005 ml/hr
10-700ml/hour	1% of the reading
701-1500ml/hour	(1+X)% of the reading, where x=0.0033% x (flow rate -700ml/hr)
cumulative flow	0.001 to 9999 milliliters
Update rate of flow velocity measurement data	1Hz
Sampling time interval	1-600 seconds
Blockage/back pressure test
Pressure measurement range	-500~2500mmHg (equivalent to -66.66-333.3kPa)
Back pressure setting range	-200-600mmHg (equivalent to -26.66-80kPa)
accuracy	± 1.3KPa (10mmHg) between -500 and 1000mmHg ± 1% of the reading is between 1000-2500mmHg
Unit selection	Millimeter mercury column, PSI，bar， kilopascal
Z high resolution	1 mmHg
PCA/Pill Measurement (Cumulative Flow)
display range	0.1〜100ml
measurement range	0.5〜100ml
accuracy	± 1% of the reading
Z high resolution	10μL
Base flow rate	1〜30 ml/hr
pressure	Up to 2500mmHg
General Specifications
storage	15 × 24 hours, at a sampling rate of 1 second
Overall dimensions	300 × 204 x220mm (WxDxH)
weight	5 kg/11 pounds (1 route) 6 kg/13 pounds (2 routes) 8 kg/18 pounds (4 routes)
main power supply	90-264VAC， 50/60 Hz, 60W
power cable	Standard IEC 10A cable
PC communication	USB A
Keyboard communication	USB B
display	LCD color graphic display ¼ "VGA
environmental conditions
Protection level	IP40
Working pressure	Up to an altitude of 2000 meters
Electromagnetic Compatibility	IEC 60529 Electromagnetic Compatibility (EMC)
anti-interference capability	Compliant with IEC 61326-1 Radiation Interference
environmental conditions	No condensation within the temperature range of 5-40 ° C
Storage temperature	0-50℃