Lubricating oil dynamic viscosity tester

1、 Product Introduction

In the operation of industrial equipment, the dynamic viscosity of lubricating oil is the core physical parameter for measuring its flow resistance and load-bearing capacity, which directly affects the quality of lubricating film formation, the degree of wear of friction pairs, and the stability and service life of equipment operation. Excessive viscosity can lead to difficulty in starting and increased energy consumption; If the viscosity is too low, it is difficult to form an effective oil film, which exacerbates mechanical wear. Especially under high temperature, high pressure, or extreme working conditions, lubricating oil is prone to viscosity degradation due to oxidation, shear, or contamination. If not monitored in a timely manner, serious equipment failure hazards will be buried. The traditional laboratory viscosity detection method is cumbersome and time-consuming, making it difficult to meet the needs of rapid on-site diagnosis.

Regarding this pain point,Lubricating oil dynamic viscosity testeremerge as the times require. This instrument is designed for rapid and accurate measurement of the dynamic viscosity of lubricating oil at working temperature on site. It adopts high-precision vibration or rotation sensing technology, combined with an intelligent temperature control system, and can directly measure the dynamic viscosity of oil products (unit: mPa · s or cP) at simulated actual operating temperatures (such as 40 ℃, 100 ℃). Some models can also synchronously obtain auxiliary parameters such as dynamic viscosity and density.

Lubricating oil dynamic viscosity testerUsually integrated with ARM processor, temperature control module, high-sensitivity viscosity sensor, 7-inch touch screen, built-in battery and data output interface, it has the characteristics of easy operation, fast response, good repeatability, and strong anti-interference ability. Only a small amount of oil sample is needed to obtain reliable viscosity data that meets the requirements of ASTM D445, GB/T 265 and other standards within a few minutes, providing scientific basis for equipment lubrication status assessment, oil product replacement decision-making and fault warning.

2、 Functional Features

High measurement accuracy: The measurement accuracy is highly consistent with large laboratory instruments and equipment, with built-in heating modules that provide accurate measurement of physical and chemical indicators of oil at standard temperatures of 40 ℃ and 100 ℃

2. Easy to operate: The touch screen and its operation prompts assist in completing the entire measurement process. With a Chinese interface, users only need to prepare an oil sample and follow the operation guide prompts to read out the results.

3. Compact and lightweight, powered by lithium batteries, with no high voltage hazards for operation and instruments. Equipped with a built-in battery (with a working time of no less than 4 hours), it is easy to carry and can quickly measure the quality of oil products on site

4. Trend analysis can be conducted to observe changes in the physical and chemical indicators of oil products;

5. Real time display of oil status.

6. Built in memory for convenient data storage

3、 Technical parameters

4、 Technical parameters of sensors