Von Scheven's HBI-C ball valve

　　Von Scheven HBI-C ball valveIt is a threaded ball valve produced by the German company von Scheven, which is a family owned enterprise with over 80 years of history. The following is a detailed introduction of HBI-C ball valve:

Basic Parameters:

Nominal diameter: DN4 to DN25.

Nominal pressure: PN500.

Material: Carbon steel.

Connection thread: There are two types: 06 series and 42 series. The internal threads on both sides of the 06 series comply with DINENISO228-1 standard; The 42 series is American standard NPT internal thread, which complies with ANSI/ASMEB1.20.1 standard.

Structural length: Complies with DIN3202-M3 series 4 standards.

Temperature range: The standard temperature range is -10 ℃ to+90 ℃, and the customizable temperature range is -50 ℃ to+250 ℃.

Von Scheven's HBI-C ball valve

Technical characteristics:

Spindle design: The spindle is installed from the outside and has anti blowing function, which improves the safety of use.

Seal maintenance: Connect the spindle with screws for easy maintenance and replacement of seals.

Installation of actuators: An actuator connection kit can be installed to facilitate automation control, but it must be specified when ordering and additional fees will be charged for this modification.

Scope of application: Applicable to Class 1 and Class 2 liquid and gas media that comply with Article 13 of PED2014/68/EU, but in principle, the stability of the flowing medium must be ensured.

Product features

Compact structure: The HBI-C ball valve consists of valve bodies connected by threads on both sides, with a compact structure that is easy to install and maintain.

Excellent Material: The valve body is usually made of steel or stainless steel, which has good corrosion resistance and pressure resistance.

Reliable sealing: The sealing technology and materials used in this ball valve ensure zero leakage when the valve is closed.

High pressure resistance: HBI-C ball valve has a high nominal pressure, up to PN500, and is suitable for high-pressure fluid control systems.

Wide temperature range: The standard temperature range is -10 ℃ to+90 ℃, and a wide temperature range of -50 ℃ to+250 ℃ can be customized according to customer needs.

6 actuator connection: An actuator connection kit can be installed (at an additional cost) to achieve automated control.

Von Scheven Technical Parameters

Model: HBI-C

Nominal diameter: DN4 to DN25

Nominal pressure: large PN500

Structural length: Complies with DIN3202-M3 series 4

Temperature range: Standard -10 ℃ to+90 ℃; Customizable from -50 ℃ to+250 ℃

Scope of use: Liquids and gases (Class 1 and Class 2 according to Article 13 of PED2014/68/EU)

Von Scheven's HBI-C ball valve