Visual radar panoramic scanning system

Visual radar panoramic scanning systemFeatures:

1. Millimeter wave radar, with a working frequency band of 80GHz, is not affected by rain, snow, water mist, light, dust, etc. It is more suitable for industrial environments with harsh environments, large dust, and high stability requirements.

2. The smaller antenna size meets the measurement needs of more working conditions;

3. Multiple lens antennas, smaller emission angles, more concentrated energy, stronger echo signals, and higher reliability compared to other radar products under the same operating conditions.

4. Has stronger penetrability and can be used normally even in the presence of adhesion and condensation;

5. The dynamic signal range is larger, making it more stable for measuring low dielectric constant media;

6. Multiple measurement modes, with a radar response time of less than 1 second in fast measurement mode

Visual radar panoramic scanning systemType:

There are currently three types of radar: fast scanning radar, precision scanning radar, and high-temperature scanning radar.

Visual radar panoramic scanning systemInstallation method:

1. Threaded installation;

2. Flange installation;

3. Lifting.

Visual radar panoramic scanning systemApplication scenarios

Radar level gauges are widely used in various industrial fields, including acid and alkali storage tanks, slurry storage tanks, solid particle storage tanks, small oil storage tanks, etc. It is suitable for strong dust and large range environments, and can penetrate steam and dust for measurement, especially suitable for use in harsh environments

Technical parameters and performance characteristics

Accuracy: When measuring liquids, the accuracy is ± 0.1mm for ranges less than 15 meters, and ± 0.2% of the measured value for ranges greater than 15 meters; When measuring solids, it is 20mm ± 0.05%

Temperature range: medium temperature -50~250 ℃, ambient temperature -30~60 ℃

Power supply: 18-35VDC

Output: Standard output 4-20mA/HART, fault diagnosis output 22mA

Protection level: NEMA (IP68)

Visible radar level gaugeMaintenance and installation precautions

Installation position: The sensor should be avoided from being installed at the center of the arched tank, and a good position should be at 1/2 of the container radius, avoiding installation very close to the tank wall

Avoid false reflections: The sensor should be tilted at a certain angle to avoid false reflection signals, especially when there are obstacles in the 1/3 conical emission area closest to the antenna. It is recommended to use a refractive plate

Environmental adaptability: The radar level gauge is suitable for harsh environments such as high temperature, high pressure, and high dust, and has the characteristics of low maintenance, high performance, and high reliability