Bag filter dust leak detector

一、 JKS-FCC100Bag filter dust leak detectorBy adopting excellent communication coupling induction technology and combining years of application experience, stable, effective, and real-time online monitoring of dust concentration has been achieved through on-site testing. Test the dust removal effect of the bag filter to avoid being unaware of bag damage. Product support includesJYSWThe software platform can independently manage data and can also be embedded into existing platforms on site, providing flexible and convenient services to different sites.

IIWorking Principle:

JKS-FCC100Bag filter dust leak detectorThe basic principle of charge induction detection technology is that high-speed airflow with particles causes them to rub and collide with each other, making the particles charged. Through electrostatic induction, the electrode generates a small current, which is proportional to the emission of particles. Therefore, the size of dust concentration can be reflected by detecting the induced current on the electrode. According to the different methods of extracting surface signal quantities of electrodes, they can be divided into DC coupling and AC coupling techniques, which are distinguished as follows:

Comparison of AC coupling and DC coupling technologies

（1）DC coupling technology is used to filter out all AC signals generated on the electrode surface, extract DC offset signals generated by friction, impact, and induction, and reflect the concentration of dust through the strength of the offset signal.

（2）AC coupling technology only extracts and analyzes the AC signals generated by charge induction on the electrode surface, filters out the DC signals generated by friction and contact, and generates dynamic induced charges on the electrode surface when charged dust particles pass near the electrode. The moving charges will generate alternating current. When a large amount of dust passes through the induction probe, the signal is superimposed, amplified and filtered, and the fluctuation of the alternating signal around the mean is analyzed to reflect the concentration of dust.

henceIt can be seen that using AC coupling technology to measure dust concentration is more accurate and representative.

3、 Measurement range

0 ~ 50 mg/m3, 0 ~ 100 mg/m3, 0 ~ 1000 mg/m3

四、 JKS-FCC100Bag filter dust leak detectorApplication fields:

JKS-FCC100Pipeline dust leak detectorThe application fields are very wide, specifically including

Food industry: flour and grains, coffee and tea, starch, dairy products, etc;

Chemical industry: plastics, fertilizers, fibers, laundry detergent, PVC， Soda ash, etc;

Tobacco industry: tobacco powder, tobacco leaves, etc;

Wood industry: sawdust, etc;

Paper industry: coal powder, soda ash, etc;

Power industry: coal powder, fly ash, etc;

Rubber industry: tires, carbon black, etc;

Mining industry: mineral powder, etc;

Environmental protection industry: dust, etc.

5、 Technical advantages:

Clearly monitor the dust removal effect of each bag;

Optimize the dust collector control system;

Improve dust removal efficiency;

Reduce the maintenance cost of the bag room;

Reduce the labor intensity of workers;

Protect the safety of downstream equipment of the dust collector;

Improve factory production and surrounding environment;

Promote enterprises to achieve automated management.