VICTOR 8265 Smart Desktop Multimeter

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The VICTOR 8265 intelligent desktop multimeter has display resolutions of 4-1/2 bits, 5-1/2 bits, and 6-1/2 bits, with the highest display reading value; #177; 1200000 words, with a basic DC voltage accuracy of up to 0.0035%.

Product Details

VICTOR 8265 Smart Desktop MultimeterThere are 4-1/2 bit, 5-1/2 bit, and 6-1/2 bit display resolutions, with a maximum display reading of ± 1200000 words and a basic DC voltage accuracy of up to 0.0035%.

VICTOR 8265 Smart Desktop MultimeterProduct Features:
The instrument has display resolutions of 4-1/2 bits, 5-1/2 bits, and 6-1/2 bits, with a maximum display reading of ± 1200000 words.
2. The accuracy of basic DC voltage is as high as 0.0035%.
3. Input measurement function

① DC voltage, AC voltage, DC current, AC current measurement, resistance, capacitance measurement, frequency measurement
② On/off, diode testing, thermocouple, thermistor temperature measurement
③ Relative value measurement (REL_%), maximum value, minimum value, average value measurement (MAX/MIN/AVG)
④ Measurement Comparison Function (COMP)

4. In the basic measurement function, the instrument measurement work can be configured:

① Manual/automatic measurement;
② ADC integration time, input impedance, automatic zero calibration;
③ Unit of temperature measurement and cold end compensation

5. Sampling timeThe fastest is 0.125 PLC (400 times/second).
6. Resistance measurement adopts 2-wire or 4-wire measurement, and 4-wire measurement can be used to eliminate the influence of lead resistance.
7. Communication measurement is true RMS measurement.
① AC voltage measurement bandwidth: 20Hz to 100kHz.
② AC current measurement bandwidth: 20Hz to 30kHz.
8. Decibel measurement with reference impedance ranging from 1 to 2400 Ω can be selected.
9. Measurement with 8 graduated thermocouples: K, E, J, T, B, S, N, R.
10. Two scale thermal resistance measurements: PT100, PT1000.
11. Measurement comparison function, with pre-set limit range (upper/lower limit).
12. The instrument has four measurement triggering working modes, which control the instrument's measurement work through triggering work.
13. The multimeter has a data recording function, and the internal memory can independently store up to 10000 sets of measurement data. The recorded data can be read and processed by the computer.
14. The instrument communicates with the computer through USB and RS232 interfaces. Supports standard SCPI commands and enables remote control of instruments through device driver software.
15. Bright and clear large screen VFD dual display, convenient and fast key operation.

Product basic functions and performance (technical indicators) accuracy=± (% reading+% range)

function	range	scope	resolution	precision	remark
DC voltage DCV	100.0000mV	-120.0000mV~120.0000mV	0.1uV	0.0065%+0.005%	Input impedance: 10 M Ω or>10 G Ω
	1.000000V	-1.200000V~1.200000V	1uV	0.005%+0.0007%
	10.00000V	-12.00000V~12.00000V	10uV	0.0035%+0.0005%
	100.0000V	-120.0000V~120.0000V	0.1mV	0.0045%+0.0006%	Input impedance: 10 M Ω
	1000.000V	-1000.000V~1000.000V	1mV	0.0055%+0.0015%	Input impedance: 10 M Ω
direct current DCI	10.00000mA	-12.00000mA~12.00000mA	0.01uA	0.015%+0.005%	Sampling resistance: 10 Ω
	100.0000 mA	-120.0000mA~120.0000mA	0.1uA	0.015%+0.005%	Sampling resistor 1 Ω
	1.000000A	-1.200000A~1.200000A	1uA	0.05%+0.015%	Sampling resistance 0.01 Ω
	10.00000A	-10.00000A~10.00000A	10u A	0.25%+0.04%	Sampling resistance 0.01 Ω
resistance OHM	100.0000Ω	0~120.0000Ω	0.1mΩ	0.01%+0.004%	Excitation current: 1mA
	1.000000KΩ	0~1.200000KΩ	1mΩ	0.01%+0.001%	Excitation current: 1mA
	10.00000KΩ	0~12.00000KΩ	10mΩ	0.01%+0.001%	Excitation current: 0.1mA
	100.0000KΩ	0~120.0000KΩ	0.1Ω	0.01%+0.001%	Excitation current: 0.01 mA
	1.000000MΩ	0~1.200000MΩ	1Ω	0.01%+0.001%	Excitation current: 1uA
	10.00000MΩ	0~12.00000MΩ	10Ω	0.04%+0.001%	Open circuit voltage is about 7V
	100.000MΩ	0~100.000MΩ	1KΩ	0.8%+0.01%	Open circuit voltage is about 7V
frequency FREQ		3～5 Hz	0.1mHz~ 100mHz	0.1%	1. Level sine wave 2. Sensitivity: 5%~100% of full scale
		5～10 Hz		0.05%
		10～40 Hz		0.03%
		40Hz～100kHz		0.01%
capacitance CAP	10.000nF	0~10.000 nF	1pF	1%+0.8%
	100.00nF	0~100.00 nF	10pF	1%+0.5%
	1 .0000uF	0~1.0000 uF	0.1nF	1%+0.5%
	10.000uF	0~10.000 uF	1nF	1%+0.5%
	100.00uF	0~100.00 uF	10nF	1%+0.5%
	1.0000mF	0~1.0000 mF	0.1uF	1%+0.5%
	10.000mF	0~10.000 mF	1uF	1%+0.5%
thermocouple TC		K/E/J/R/S/T/B/N	0.1℃/1℃	1.5℃	Please refer to the instruction manual for detailed indicators
thermocouple RTD		PT100/PT1000	0.1℃	0.4℃
Conductivity measurement	100.00Ω	0~120.00Ω	10mΩ	0.05%+0.05%
Diode testing	10.000V	0~5.500V	1mV	0.05%+00.5%	Excitation current: 1mA/6V

Note: Starting from November 2024, the accuracy of DC current 1A will be corrected to 0.05%+0.015%

Accuracy=± (% reading+% range)

function	range	Frequency band	precision	remark
AC voltage ACV	100mV	20Hz～50Hz	0.8+0.05	Input impedance: 1 M Ω± 2%, parallel capacitance<100pF
		50Hz～100Hz	0.1+0.03
		100Hz～10kHz	0.05+0.03
		10kHz～30kHz	0.05+0.05
		30kHz～50kHz	0.5+0.05
		50kHz～100kHz	0.8+0.5
	1V~100V	20Hz～50Hz	0.8+0.05
		50Hz～100Hz	0.1+0.03
		100Hz～10kHz	0.05+0.03
		10kHz～30kHz	0.05+0.05
		30kHz～50kHz	0.5+0.05
		50kHz～100kHz	0.5+0.5
	750V	20Hz～50Hz	0.8+0.05
		50Hz～100Hz	0.1+0.03
		100Hz～10kHz	0.05+0.08

function	range	Frequency band	precision	remark
AC current ACI	10mA~100mA	20Hz～50Hz	0.5+0.05	Shunt resistor 10mA：10Ω 100mA：1Ω
		50Hz～5kHz	0.1+0.03
		5kHz～10kHz	0.3+0.03
		10kHz～30kHz	0.5+0.05
	1A	20Hz～50Hz	0.5+0.05	Shunt resistor 0.01Ω
		50Hz～100Hz	0.2+0.05
		100Hz～1kHz	0.3+0.05
		1kHz～5kHz	0.8+0.2
	10A	20Hz～50Hz	0.5+0.05	Shunt resistor 0.01Ω
		50Hz～100Hz	0.5+0.05
		100Hz～1kHz	0.5+0.05
		1kHz～5kHz	0.8+0.05

一般特性：
① Working temperature and humidity: 0 to 50 º C ≤ 80% RH, no condensation; 40 to 50 º C ≤ 70% RH.
② Storage temperature and humidity: -25 to 60 º C ≤ 90% RH, no condensation.
③ Compliant with safety standards: EN61010-1; 1995, EN61010-2-031; 1995
④ Electromagnetic compatibility (EMC): EN61326-1:2006
⑤ Vibration and drop: IEC 60068-2-64:2008 IEC 60068-2-32：2008
⑥ Instrument power supply
220V ± 10% AC, power frequency: 50Hz or 60Hz, power: approximately 18W.
⑦ Size and weight
260 × 110 × 313 (mm), approximately 4kg
⑧ Attachment
Test probe 1 payment
1 power cord
1 USB cable
One DB/9 serial port cable
1 manual