- Phone
-
Address
25th Floor, Building G, Wangzuo Modern City, No. 35 Tangyan Road, High tech Zone, Xi'an City, Shaanxi Province
Product Categories
Xi'an Shengli Instrument Co., Ltd
VICTOR 02S temperature calibrator
NegotiableUpdate on 05/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
VICTOR 02S temperature calibrator (hereinafter referred to as calibrator) is a handheld portable instrument powered by batteries that can measure and output electrical and physical parameters. Can be used to measure DC voltage, resistance, thermocouple, and thermal resistance; Simulate output DC voltage, resistance, thermocouple, and thermistor.
Product Details
VICTOR 02S temperature calibrator(hereinafter referred to as the calibrator) is a handheld portable instrument powered by batteries that can measure and output electrical and physical parameters. Can be used to measure DC voltage, resistance, thermocouple, and thermal resistance; Simulate output DC voltage, resistance, thermocouple, and thermistor.
Basic characteristics of the product
1. Input measurement characteristics
*Basic functions: DC voltage DCV, resistance OHM, thermocouple TC, thermal resistance RTD, on/off
*The highest measurement accuracy is 0.05%, and the measurement display is 5 digits.
*Measurement rate: 2-3 times per second.
*OHM and RTD can perform 2W/3W/4W measurements.
*The measured temperature value and corresponding temperature signal are displayed on the same screen.
2. Analog output characteristics
*Basic functions: DC voltage DCV, resistance OHM, thermocouple TC, thermal resistance RTD
*The highest output accuracy is 0.05%, and the output is displayed as 5 bits.
*The output setting can be manually adjusted by bit.
*There are two settings for OHM excitation current: H/L.
*The output temperature value and corresponding temperature signal are displayed on the same screen.
3. Built in high-precision temperature sensor with high-precision cold end compensation.
The compensation methods for the cold end of the thermocouple can be set, including manual compensation, automatic compensation, compensation connection disconnection, etc.
4. Maintain the settings function, including:
Automatic shutdown, backlight, flashlight, buzzer, etc
5. Other
*Segment code LCD screen display, white backlight.
*LED flashlight illumination.
*Powered by 3 No. 5 alkaline batteries, the battery compartment door allows for easy battery replacement and low battery detection.
*Compact, sturdy, reliable, suitable for on-site use, and affordable.
*User selectable high suction magnetic strap.
1VICTOR 02S temperature calibratorBasic functions and performance (technical indicators) of the product
Input measurement function[Applicable toWithin one year after calibration23℃±5℃、20～70%RHAccuracy=±（%set value+Character)]
measurement function |
range |
measurement range |
resolution |
accuracy |
remark |
|
DC voltage DCV |
100mV |
-110.000mV~110.000mV |
0.01mV |
0.05%+0.03mV |
Input resistance: approximately1MΩ |
1V |
-1.1000V~1.1000V |
0.0001V |
0.05%+0.3mV |
||
30V |
-30.000V～30.000V |
0.001V |
0.02%+2mV |
||
|
resistance OHM |
500Ω |
0~550.00Ω |
0.01Ω |
0.05%+0.2Ω |
2W/3W/4Wmeasurement 500Ωabout1mAmotivation 5KΩabout0.1mAmotivation Open circuit voltage: approximately2.5V The measurement accuracy does not include lead resistance |
5KΩ |
0~5.5000KΩ |
0.0001KΩ |
0.05%+2Ω |
||
|
thermocouple TC |
R |
0°C～1767°C |
1°C |
0.05%+3℃(Less than or equal to)100°C） 0.05%+2℃(Greater than)100°C） |
adoptITS-90Temperature scale Accuracy does not include errors in cold end compensation Accuracy does not include the inaccuracy of sensors Accuracy does not include the influence of thermoelectric potential The material corresponding to the left division mark is as follows: R: platinum-rhodium13-platinum S: platinum-rhodium10-platinum K: nickel-chromium-Nickel silicon E: nickel-chromium-Copper nickel (constantan) J: iron-Copper nickel (constantan) T: copper-Copper nickel (constantan) N: Nickel chromium silicon-Nickel silicon B: platinum-rhodium30-platinum A: Tungsten rhenium 5 -Tungsten rhenium 20 C: Tungsten rhenium 5 -Tungsten rhenium 26 D: Tungsten rhenium 3 -Tungsten rhenium 25 |
S |
0°C～1767°C |
||||
K |
-100.0°～1372.0°C |
0.1°C |
0.05%+2℃(Less than or equal to)-100°C） 0.05%+10(Greater than)-100°C） |
||
E |
-50.0°C～1000.0°C |
||||
J |
-60.0°C～1200.0°C |
||||
T |
-100.0°C～400.0°C |
||||
N |
-200.0°～1300.0°C |
||||
B |
600°C～1820°C |
1°C |
0.05%+3℃ |
||
A |
0°C～2500°C |
1°C |
0.05%+3℃ |
||
C |
0°C～2310°C |
1°C |
|||
D |
0°C～2310°C |
1°C |
|||
|
thermal resistor RTD （3W） |
Pt100 385 |
-200.0°C～800.0°C |
0.1°C |
0.05%+0.6℃ |
adoptPt（385）Temperature scale 2W/3W/4Wmeasurement 500Ωabout1mAmotivation 5KΩabout0.1mAmotivation Open circuit voltage: approximately2.5V Accuracy does not include2 W/3 W/4WError caused by mismatched lead resistance measurement Accuracy does not include the inaccuracy of sensors Accuracy does not include the influence of thermoelectric potential |
|
Pt200 385 |
-200.0°C～630.0°C |
||||
|
Pt500 385 |
-200.0°C～630.0°C |
||||
|
Pt1000 385 |
-200.0°C～630.0°C |
||||
Cu50 |
-50.0°C～150.0°C |
||||
|
on-off detection |
500Ω |
≤50Ωvocalize |
0.01Ω |
about1mAmotivation |
Analog output function[Applicable toWithin one year after calibration23℃±5℃、20～70%RHAccuracy=±（%set value+Character)]
output function |
range |
output range |
resolution |
accuracy |
remark |
|
DC voltage DCV |
100mV |
-10.000mV~110.00mV |
0.01mV |
0.05%+0.03mV |
Maximum output current:0.5mA |
1V |
-0.1000V~1.1000V |
0.0001V |
0.05%+0.3mV |
Maximum output current2mA |
|
|
ohm OHM |
400Ω |
0~400.0Ω |
0.1Ω |
0.05%+0.2Ω |
The excitation current is±0.1～±5mA Maximum output voltage2V The excitation current is±0.1～0.5mAWhen, add0.3ΩAdditional error Accuracy does not include lead resistance |
4KΩ |
0~4.000KΩ |
1Ω |
0.05%+2Ω |
||
|
thermocouple TC |
R |
0°C～1767°C |
1°C |
0.05%+3℃(Less than or equal to)100°C） 0.05%+2℃(Greater than)100°C） |
adoptITS-90Temperature scale Accuracy does not include errors in cold end compensation Accuracy does not include the inaccuracy of sensors Accuracy does not include the influence of thermoelectric potential The material corresponding to the left division mark is as follows: R: platinum-rhodium13-platinum S: platinum-rhodium10-platinum K: nickel-chromium-Nickel silicon E: nickel-chromium-Copper nickel (constantan) J: iron-Copper nickel (constantan) T: copper-Copper nickel (constantan) N: Nickel chromium silicon-Nickel silicon B: platinum-rhodium30-platinum A: Tungsten rhenium 5 -Tungsten rhenium 20 C: Tungsten rhenium 5 -Tungsten rhenium 26 D: Tungsten rhenium 3 -Tungsten rhenium 25 |
S |
0°C～1767°C |
||||
K |
-200.0°C～1372.0°C |
0.1°C |
0.05%+2℃(Less than or equal to)-100°C） 0.05%+1℃(Greater than)-100°C） |
||
E |
-200.0°C～1000.0°C |
||||
J |
-200.0°C～1200.0°C |
||||
T |
-250.0°C～400.0°C |
||||
N |
-200.0°C～1300.0°C |
||||
B |
600°C～1820°C |
1°C |
0.05%+3℃ |
||
A |
0°C～2500°C |
1°C |
|||
C |
0°C～2310°C |
1°C |
|||
D |
0°C～2310°C |
1°C |
|||
|
thermal resistor RTD |
Pt100 385 |
-200.0°C～800.0°C |
0.1°C |
0.05%+0.6℃ |
adoptPt（385）Temperature scale The excitation current is±0.1～±5mA Maximum output voltage2V The excitation current is±0.1～0.5mAWhen, add0.3ΩAdditional error Accuracy does not include lead resistance Accuracy does not include the influence of thermoelectric potential
|
|
Pt200 385 |
-200.0°C～630.0°C |
0.1°C |
|||
|
Pt500 385 |
-200.0°C～630.0°C |
0.1°C |
|||
|
Pt1000 385 |
-200.0°C～630.0°C |
0.1°C |
|||
Cu50 |
-50.0°C～150.0°C |
0.1°C |
IIGeneral characteristics of the product
l Working temperature and humidity:0 to 50ºC ≤80%RHNo condensation;40 to 50ºC ≤70%RH.
l Storage temperature and humidity:-25 to 60ºC ≤90%RHNo condensation.
l Electrical safety:EN61010-1：2001
Voltage endurance:Between the terminal and the casingAC3540V(50/60Hz)／5second.
Insulation impedance:Between the terminal and the casingDC1000V /100MΩOr larger.
l Electromagnetic compatibility（EMC）：EN61326-1：2006
Meets performance criteria2Temporary reduction or loss of functionality and performance, but capable of self recovery.
l Protection levelIP40.
l Vibration and Falling:IEC 60068-2-64：2008TheIEC 60068-2-32：2008
Random,2g，5～500Hz；1Rice drop test.
l CEauthentication.
l Quality standards: in accordance withTUV ISO 9001Development, design, and manufacturing.
l Calibration cycle and preheating time:
To ensure the accuracy of this table, its calibration cycle is one year
The startup preheating time is greater than30minute
l Instrument display and buttons
segment codeLCDDisplay, white backlight
Adopting silicone rubber buttons
l Instrument power supply
3section5Powered by alkaline batteries
l Dimensions and Weight
