Ultrafiltration water treatment equipment

Ultrafiltration water treatment equipment

1. According to the installation diagram, connect the pipes and secure them with rubber pads after the equipment is in place to prevent leakage at the connection point.

2. Timely discharge the sludge according to the sludge production and storage time. Generally, the sludge storage time is 2-4 hours. Use valves to control the amount of returned sludge, and the remaining sludge is sent to the sludge concentration tank. Control the ratio of returned sludge to net discharged sludge.

3. Strive to achieve simple system operation, easy management, and minimize operating costs;

4. The equipment is easy to operate, easy to maintain, with new technology, good effect, and long service life. It can be arranged according to the layout or specially arranged according to the terrain needs.

After the sewage treatment equipment has treated the sewage well, there will be effluent, which will overflow into the sedimentation tank. After sedimentation, clear water will be added to the tank, and the sludge in the sedimentation tank will be regularly pumped into the tank by a mud pump for smooth operation. It is also possible to homogenize the wastewater by adjusting its own pH value to meet the requirements of subsequent treatment processes.

6. Safety operation and precautions: The aeration tank unit aeration biochemical system is mainly used in certain situations.

7. Do not dispose of garbage and waste into the pool or pipe gallery.

8. Installation: Position according to the installation diagram, and place each box in sequence. The position and direction of the boxes must not be misplaced, and the spacing between them must be accurate, and the pipes must be connected properly.

9. Pay attention to protecting various measuring instruments to prevent collision. The energy recovery method is to build the municipal solid waste incineration site next to the sewage treatment plant Incinerate solid waste together with sewage sludge The obtained electrical energy is used for the operation of the processing plant.

10. Smell frequently. Check for any unusual odors in the shaft seal arrangement, couplings, motors, electrical equipment, and other parts of the task equipment.

11. Distributed sewage treatment technology has the characteristics of small equipment area, no need to lay pipeline network, and high equipment integration. Therefore, infrastructure and civil engineering costs account for a relatively small proportion of the overall investment, while some investment is mainly used for the procurement and installation of sewage treatment equipment.

12. Fluctuating operation effect: Sewage requires short settling time, high efficiency, and good effluent quality under ideal movement conditions.