Purified water treatment equipment

Purified water treatment equipmentWhen the water level in the regulating pool is too high, it is easy to start and operate the two submersible sewage pumps simultaneously. The operating status can be adjusted according to the actual situation to achieve the desired operating effect;

1. This product is made of high-strength ship paint for corrosion prevention, which is non-toxic, resistant, not easily aged, and not deformed. The product body structure adopts a circumferential dense corrugated structure, with high compressive and impact strength, durability, and a service life of over 40 years under normal use.

2. Easy to achieve automatic control and simple management operation.

3. The equipment occupies a small area and has a light weight: the air handling equipment occupies an area of less than 6 square meters.

4. The biochemical tank adopts the biological contact method, which has a relatively low volume load of the packing material, and the microorganisms are in the stage of self transformation, resulting in low sludge production.

5. Made of 304 stainless steel sheet, it is corrosion-resistant and durable. The sealed process of the equipment achieves no odor leakage, and the material of the treatment tank can be made of stainless steel, carbon steel anti-corrosion, steel plastic composite materials, fiberglass or plastic, etc., and meets the requirements of service life. When using carbon steel anti-corrosion material, the carbon steel used should be type.

6. The water pump of this equipment adopts a submersible sewage pump. When starting the fan, check whether the rotation direction is correct and avoid reverse rotation.

When the release device is blocked, the vacuum valve can be opened to open the release tongue, and it can be cleaned with clean water to flush the blockage. Then, the valve can be closed, which usually only needs to be opened for 10-20 seconds.

8. It is divided into three parts, with a total processing time of 6 hours. The water flow characteristics of the packing material are very high, and the specific surface area of the packing material is large. The treatment load is 5-10 times that of the general one. The biochemical tank adopts central gallery microporous aeration, and the sewage continuously circulates in the biochemical tank, fully contacting the biofilm on the packing material to achieve rapid degradation of organic matter.

9. When the water level in the regulating pool is too high, it is easy to start and operate the two submersible sewage pumps simultaneously. The operating status can be adjusted according to the actual situation to achieve the desired operating effect;

10. The mixed reaction precipitation unit consists of a mixed reaction tank and an inclined plate precipitation tank. Add combustion regulating wastewater before lifting the pump and add it at the outlet of the coagulation reaction tank; The reaction between incineration and wastewater is stirred by an impeller.

Purified water treatment equipment