STX-610 Diamond Wire Cutting Machine

NegotiableUpdate on 12/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The STX-610 diamond wire cutting machine is a new generation of precision cutting equipment independently developed by our company, designed specifically for cutting high hardness conductive/non-conductive materials. This equipment solves the industry problem that wire EDM machines cannot process non-conductive materials. It can cut various metals, non-metallic materials with a Mohs hardness lower than diamond wire (9.5), as well as brittle materials that are prone to breakage. Can be better applied to experiments and research and development in various industries. This machine can cut materials such as ceramics, crystals, glass, metals, geological samples, magnetic materials, organic materials, thermoelectric materials, infrared optical materials, composite materials, and biomedical materials.

Product Details

Product Introduction STX-610金刚石线切割机

STX-610 Diamond Wire Cutting MachineIt is a new generation of precision cutting equipment independently developed by our company, designed specifically for cutting high hardness conductive/non-conductive materials. This equipment solves the industry problem that wire EDM machines cannot process non-conductive materials. It can cut various metals, non-metallic materials with a Mohs hardness lower than diamond wire (9.5), as well as brittle materials that are prone to breakage. Can be better applied to experiments and research and development in various industries. This machine can cut materials such as ceramics, crystals, glass, metals, geological samples, magnetic materials, organic materials, thermoelectric materials, infrared optical materials, composite materials, and biomedical materials.

Main Features STX-610金刚石线切割机

Suitable for precision cutting of brittle and easily cleavable crystals.
Using diamond wire for cutting, the cutting quality is excellent.
Adopting aluminum profile structure, it is beautiful and lightweight.

Technical Specifications STX-610金刚石线切割机

Product Name	STX-610 Diamond Wire Cutting Machine
Product Model	STX-610
Installation requirements	1. Humidity: 10-85% RH (at 25 ℃ without condensation) Temperature: 0-45 ℃. 2. There are no strong seismic sources or corrosive gases around the equipment. 3. Air source (compressed air): ≥ 0.6Mpa 4. Coolant: Required (recommended to use - specialized cutting oil) 5. Power supply: single-phase: AC220V 50Hz, national standard three pole socket 10A, must have good grounding 6. Workbench: No requirement 7. Ventilation device: Good ventilation environment, no special device requirements
Main parameters	1. Total power: 500W
	2. Power supply interface: National standard three pole socket with fuse AC220 50Hz 10A
	3. Diamond wire length: ≤ 150m
	4. Diamond wire diameter: 0.25~0.45mm
	5. Diamond wire tensioning method: adjustable pneumatic tensioning
	6. Tension pressure adjustment range: 0.1~0.4Mpa
	7. Spindle cutting rotation mode: reciprocating rotation
	8. Spindle drive motor: AC frequency converter+reducer AC220V 300W
	9. Spindle speed (linear velocity): adjustable from 0 to 8m/s
	10. Y-axis and Z-axis drive motors: precision stepper motors
	11. Effective stroke of Z-axis worktable: ≤ 160mm
	12. Y-axis worktable effective stroke: ≤ 180mm
	13. Z-axis and Y-axis feed accuracy: 0.01mm
	14. Sample loading two-dimensional turntable (manual): Horizontal: 0-360 ° Tilt angle: ± 10 °
	15. Workbench center load-bearing capacity: ≤ 5Kg
	16. Upper limit of inner distance between two guide wheels: ≤ 180mm
	17. Upper limit of cutting workpiece diameter and length: Φ 150mm × 150mm
	18. Control mode: PLC programmer+7-inch touch screen
	19. Parameter display format: numerical
	20. Remote Control Handle (Knife Alignment): Wired Remote Control Handle
	21. Safety control device: • Winder overtravel self stop protection; Z/Y-axis platform overtravel self stop protection; • Self stop protection for broken wires; Emergency stop switch.
	22. Video surveillance function: None
	23. Main body composition: Aluminum alloy frame
	24. Equipment dimensions (length x width x height): 740mm x 800mm x 1580mm
	25. Net weight: ≈ 190Kg
Note: The equipment is powered by domestic standard AC220V 50Hz, and the actual power supply is subject to the parameters on the label at the back of the product.