Portable Loop Bubble Generator

1Portable Loop Bubble GeneratorIt is manufactured using imported stainless steel plate technology, and all technical indicators meet national standards. It is an upgraded product of super constant temperature water bath. It has the advantages of high temperature control accuracy, strong corrosion resistance, compact structure, beautiful appearance, energy saving, and long service life. It is mainly used by defoamer manufacturers and is selected for precision products in experimental science fields such as biology, physics, plants, chemical engineering, medical care, and environmental protection.

IIPortable Loop Bubble Generatorstructure

The shell is made of metal plate, and the control box is directly installed on the water tank. There is one stainless steel impact pipe outlet water nozzle, a transparent glass bubble tube with markings, and an imported high-quality water pump as the circulating power in the water tank. The intelligent microcomputer LCD display temperature control system is used to improve the accuracy of temperature control.

3、 Technical parameters

1. Power supply: 220V 50Hz

2. Temperature range: Room temperature+5 ℃ -99.9 ℃

3. Constant temperature fluctuation: ≤ 0.2 degrees Heating power: 150W

4. Constant temperature setting and measurement: digital control, using intelligent microcomputer digital temperature control system to improve the accuracy of temperature control

5. Pump flow rate: ≥ 3L/min, power 18W

6. Total power consumption: ≤ 200W

7. Capacity: 500ml

4、 Usage method

This instrument uses a 220V AC power supply. Please ensure that the rated current of the power socket is not less than 10A and that it has a safety grounding device (please connect the grounding device to the working room when using) before use.

Please note that when adding water beyond the bottom of the bubble tube, soft water must be used, preferably distilled water. Do not use hard water such as well water, river water, spring water, etc., to prevent the heating tube from bursting and affecting the sensitivity of the constant temperature. (Note to plug in the instrument socket first, then plug in the power plug)

Firstly, turn on the power, activate the circulating water pump and temperature control switch, and wait for about 1 minute

(1) Press the "SET" key or "∧", "∨" to enter the temperature setting state.

(2) The lower display shows "SP", and the upper display shows "temperature setting value". Then press the "∧" or "∨" keys to increase or decrease the temperature setting value to all set operating temperatures. After setting, press "SET"

Press the key to approve and exit the setting state.

(3) For detailed operation, please use according to the temperature control table manual

5、 Precautions

1. Please read the instructions carefully before use, and remember to add water to the water level line before turning on the power when closing the faucet.

2. Set the digital temperature display, turn on the power switch to raise the temperature of the water tank, wait for the water temperature to reach the desired value, turn on the circulating power switch, and the water in the water tank will circulate evenly to the indoor temperature.

3. The water level should not be too high to prevent experimental errors caused by water overflow.

4. To extend the service life of the instrument, please be careful not to let the control box get damp and prevent electrical leakage.

6. The instrument is covered by a one-year warranty from the date of manufacture (any human error or improper use will incur production costs), with lifelong maintenance.

7. After use, please drain the water (water outlet), wipe it clean with a dry cloth, and place it in a ventilated and dry place.