Oil and gas tester

GAS D30Oil and gas testerThe oil containing air flowing through the quick connector of the oil gun is collected by a gas flow sensor. The built-in high-sensitivity pressure sensor can collect flow and pressure data. The integrated button panel can input oil volume data, calculate gas-liquid ratio, input oil and gas space and the number of gasoline guns, and calculate the sealing pressure limit without manual calculation and table lookup. The product is equipped with two types of quick connectors to meet the needs of the vast majority of oil and gas recovery guns on the market.

1Oil and gas testerKey Features:

1The overall material is made of stainless steel, which poses no risk of static electricity accumulation and is sturdy and durable;

2. Integrated nitrogen access and nitrogen flow regulation function;

3. The product is equipped with gas flow sensors and pressure sensors, integrated with a button panel and color LCD display screen,2.8Inch high brightness, high-resolution, low-power color LCD, displaying more information on the same screen and making graphics more user-friendly;

4. Intelligent operation management software system

Real time curve display with flow rate and pressure, which can visually display flow rate and pressure fluctuationsSituation: Flow fluctuations can analyze changes in vacuum pump suction, and pressure fluctuations can analyze the sealing effect of the entire station's oil and gas recovery system;

5. Built in Chinese character library, supports Chinese Pinyin input method, this machine can record gas station information and connection methods；

6. Built in data management, convenient for querying historical records and gas station list information;

7. Built in power management system, automatically shuts down after 20 minutes without operation, using high capacity18650Rechargeable lithium battery power supply, with a long usage time.

2、 Electrical parameters：

●Measurement medium: general gas (air), oily air

●Flow range:10～120L/min

●Pressure range:-3kPa～3kPa

●Explosion proof mark:Ex ib IIB T4 Gb

●Environmental conditions: Temperature -40℃～50℃

relative humidity ≤95%

atmospheric pressure 0～106kPa

IIIProduct Accessories Introduction

1. Static grounding clip:

Ensure the equipotential connection between the tester host, oil storage tank (including trolley), and the grounding bar of the fuel dispenser to prevent the risk of static electricity accumulation during on-site operations and eliminate safety hazards.

2. Nitrogen pressure reducing gauge:

During the process of liquid resistance and airtightness testing, nitrogen is required as the detection medium. Generally, if the nitrogen pressure is too high and directly connected to the equipment, it will pose a danger to the testing equipment and gas recovery system of the gas station. Therefore, it is necessary to first use a nitrogen pressure reducing gauge toAround 35kPa, then connect to the testing system and equipment behind. Accompanying it is a 2-meter 8 * 12mm nitrogen connection pipe, used to physically connect the nitrogen pressure reducing gauge to the testing instrument host.

3. Nitrogen cylinder:

Used in the process of liquid resistance and airtightness testing, equipped by defaultA 10L nitrogen cylinder can be used for 2-3 stations with a single inflation, and its volume is relatively small for carrying in general vehicles.

4. Bluetooth printer:

The tester host itself has functions such as data storage and historical record query，Sometimes it is necessary to print it out for data archiving purposes, Built inWireless Bluetooth module，Data can be directly printed and archived through a Bluetooth printer.

stainless steelA 50L oil storage tank, according to testing standards, with a single 15L serving as valid data, can test three gas-liquid ratios. It is small in size, lightweight, and can be easily placed in the trunk of a regular family sedan, making it convenient to carry.