CCU Clean Combustion Technology

NegotiableUpdate on 06/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

CCU clean combustion technology is used for the treatment of most gases such as gas released from oil and gas wells, chemical volatile gases, organic waste gases, biomass gases, and coal mine gas

Product Details

CCU Clean Combustion TechnologytechnologyIntroduction and Principle

1. CCU clean combustion device is an ultra-low emission VOCs treatment system that utilizes porous media surface combustion technology to effectively treat exhaust gas and achieve safe operation under any combination and concentration of oil and gas. The rated processing load of a single device is 0.5MW~12MW, and a multi-level system can be formed by installing multiple devices in sequence to adapt to a wider range of load changes and meet higher flow and processing rate requirements.

2. Before combustion, organic waste gas and combustion air are mixed in proportion to form a premixed gas

3. PLC Control and Optimization System

4. Low calorific value exhaust gas (6.3MJ/Nm3) can also burn stably

3@O1}~D(85~`YN}{KEN5[FV.png

CCUClean combustion technologytechnologyTechnical Features

1. Ultra low emissions, no visible smoke, no visible flames

2. The flame shape (as shown in the right figure) is stable, and the pressure fluctuation in the combustion chamber caused by heat release is small

3. Special alloy material with good high-temperature life and oxidation resistance

4. Low thermal inertia, uniform temperature field distribution

5. Uniform and isotropic flame distribution

6. Excellent anti backfire characteristics, safe and stable combustion

7. Corrosion resistance, thermal shock resistance, and mechanical impact resistance

8. Compact equipment structure, fast start-up, stable operation, and low noise

9. Scientific and precise air-fuel ratio, extremely low CO and NOx emissions

10. Oxygen is fully mixed with organic waste gas, and the combustion efficiency is much higher than non premixed combustion, achieving a higher VOCs removal rate (DRE)

VLYDH{I4CXH}G`TB(V7Z)A3.png

Product advantages

1. The removal rate of VOCs can reach 99.99%, which can meet any strict emission standards

2. Can adapt to large-scale load changes

3. No visible flames, smoke-free

4. Can handle low concentration VOCs

5. The land occupation scale is only about one-fifth of RTO and RCO

6. Low energy consumption, no need for condensation, no need for bed preheating and insulation

7. Short startup time, device startup time is about 3 minutes

8. Porous media have natural flame stabilization properties