Metallurgical Standard National Load Soft Sampling Machine

I. Overview

ZYJ-01 typeMetallurgical Standard National Load Soft Sampling MachineIt is a specialized equipment used by refractory material production enterprises, research institutions, and laboratories to drill various samples such as load softening samples and thermal expansion samples. This device has high precision and good rigidity, making it an ideal equipment for drilling samples.

2、 Technical parameters

1. Maximum drilling diameter: φ 36-50 (mm)

2. Maximum processing depth: 125 mm

3. Spindle speed series: 5

4. Spindle speed: 160 250 500 800 1050

5. Distance from spindle axis to column surface: 340 mm

6. Distance from spindle axis to base vertical working surface: 420-800 (mm)

7. Base working surface size: 400 × 380 (mm)

8. Water nozzle with a diameter of 12 mm

9. Water pressure:>0.2MPa

10. Electric motor: 1.5kW

IIIMetallurgical Standard National Load Soft Sampling MachineInstructions for Use

1. Before starting the machine tool, a 500 megohmmeter should be used to measure the insulation resistance value, which should not be less than 0.5 megohms. The two-color wire in the power cord should be well grounded.

2. Regularly add lubricating oil (grease) according to the lubrication requirements of the machine tool, check whether the spindle box and column are clamped, whether the transmission components, spindle, sleeve lifting, and electrical equipment are normal.

3. When lifting the spindle box, please first release the spindle box locking handle, then rotate the handle, and when it is adjusted to the desired position, tighten the locking handle before starting the machine tool.

4. This machine tool has a circular dial depth setting mechanism that controls the depth of the drill bit: when adjusting the drilling depth, first release the handle to make the drill bit contact the surface of the workpiece, then rotate the dial to the drilling depth position, and finally tighten the handle.

5. The spindle can automatically reset, and the drill rod can drill a hole when pressed down and automatically reset when released. When the elasticity is insufficient, loosen the top thread at the bottom of the spring box, and rotate the spring box to adjust the size of the reset elasticity.

6. When changing the speed, lift the upper cover and pay attention to safety to prevent the cover from falling.