Honeywell Sensor AWM5000 Series Supply

Honeywell HoneywellAmplify gas mass flow sensor AWM5000 series, compensating type. 0 SLPM to 20.0 SLPM. Analog output

Product Introduction
Coaxial flow measurement
The AWM5000 series micro bridge gas mass flow sensor adopts a Venturi tube type flow housing. This series can measure airflow with speeds up to 20 liters per minute (SLPM) and a maximum pressure drop of 2.25 'H2O. The microbridge chip is directly in contact with the airflow, greatly reducing errors caused by blockage of ventilation holes or bypasses.

Durable and versatile packaging
The sturdy plastic packaging is designed to withstand a common mode pressure of up to 50 psi, and the small sensing element can withstand an impact of 100 g without affecting performance. The accompanying "AMP" compatible connector provides ultra reliable connectivity, suitable for demanding applications.

Built in signal conditioning
Each AWM5000 sensor includes a circuit system that can perform amplification, linearization, temperature compensation, and gas calibration functions. Regardless of the flow range (5, 10, 15, or 20 SLPM) or calibration gas (nitrogen, carbon dioxide, nitrous oxide, or argon), all products may achieve a linear output of 1 to 5 Vdc. Active laser can perform all calibrations.

Attention: Product damage
The AWM series micro bridge gas mass flow sensor is not suitable for measuring liquid flow, as liquid passing through the sensor can damage the sensor.

Honeywell Sensor AWM5000 Series SupplyThe basic parameters are as follows:

Power supply voltage: minimum 8.0 Vdc, typical value 10.0 Vdc, maximum 15.0 Vdc.
Port type: 1/4 inch -18 NPT
Compensation temperature range: 0 ° C to 50 ° C [32 ° F to 122 ° F]

Output temperature drift:
± 7% reading
± 10% reading

Adjust the output voltage of the point:
5.0 Vdc at 20 SLPM
5.0 Vdc at 5 SLPM
5.0 Vdc at 15 SLPM
5.0 Vdc at 10 SLPM

Impact: Peak value of 100 g, half sine wave of 6 ms (3 drops, each along the 3-axis direction)
Zero position: minimum 0.95 Vdc, typical value 1 Vdc, maximum 1.05 Vdc
Storage temperature: -20 ° C to 70 ° C [-4 ° F to 158 ° F]

Power consumption: maximum 100 mW

Flow/pressure range:
0 SLPM 到 5.0 SLPM
0 SLPM 到 10.0 SLPM
0 SLPM 到 15.0 SLPM
0 SLPM 到 20.0 SLPM

Working temperature: -20 ° C to 70 ° C [-4 ° F to 158 ° F]

AWM5103 ,AWM5104,AWM5102 ,AWM5101,

Connector ordering guide
Note: Within the given flow range of the calibration gas, all models can achieve linear output of 1-5 VDC through 10 VDC power supply.
1. Nitrogen calibration is the same as oxygen and atmospheric calibration.
2. Carbon dioxide calibration is the same as N2O calibration.

Honeywell Sensor AWM5000 Series SupplyFor more product details, please call our company.