German Spike X-ray Fluorescence Spectrometer

Spike Analytical Instruments, a German company, is a pioneer in on-site metal detection. With its expertise, rich experience, and decades of advantages in X-ray fluorescence spectroscopy technology, Spike has launched a handheld X-ray fluorescence analyzer - SPECTRO xSORT. The instrument can obtain analysis results that were previously only achievable by laboratory spectrometers within a few minutes on site without external power supply or air conditioning.

The SPECTRO xSORT handheld X-ray fluorescence spectrometer is a compact instrument that is sturdy, durable, and ergonomic

SPECTRO xSORT Technical Parameters:

SPECTRO xSORT: Technical specifications
detector
 SDD
Mn K ą Resolution: FWHM half width<170eV
Input count rate up to 250kcps

German Spike X-ray Fluorescence SpectrometerSource of excitement
X-ray tube i
W Yang
 大40 kV，50µA


German Spike X-ray Fluorescence Spectrometercontrol
Integrated and detachable PDA
Windows operating system
SD memory card, Bluetooth, wireless LAN, USB port

Spectrometer data
Length: 314mm
Width: 84mm
Height: 333mm
Weight: 1.45kg
Battery weight: 290g
Rechargeable lithium battery
2-3 hours of continuous working time
100-240V,+/-10%, 50/60Hz charger/transformer

software
ICAL (Intelligent Logic Standardization Calibration)
Data management: post-processing and protocols for storing data
Analysis mode:
-RoHS testing and rapid analysis of Pb for various materials ranging from polymers to alloys
-Multiple analyses have shown that
-Automatic average calculation
-Calculate standard deviation and relative standard deviation

RoHS Directive Sorting Mode
-Display whether the analysis results meet the requirements
-Quickly analyze environmentally friendly samples, such as contaminated soil and sediment
-Identification of ores, concentrates, and tailings

Key Features:

The instrument adopts a desktop design similar to that of Spike's high-performance laboratoryFluorescence SpectrometerThe same small low-energy X-ray tube ensures accurate ion excitation effect. The specially developed SDD detector has a data acquisition speed 10 times faster than traditional detectors, improving the analytical flexibility of the instrument.

All important elements can be determined within a few minutes
SPECTRO xSORT can obtain analysis results from other laboratories and complete the analysis of all elements from S to U in the periodic table in just a few minutes. RoHS directive quick detection only requires 30. The analysis of polluted soil and sediment only takes a few hours. Suitable for the mining industry, it can identify ores, concentrates, and tailings. Even on site, the on-site analysis results can be accurately matched with the actual analysis points through the optional GPS package.

Specially developed SDD detector with data acquisition speed 10 times faster than traditional detectors:
-All relevant elements from S to U can be measured at once
-Comprehensive calibration: simple measurement without the need for operator decision-making
-How many hours can other laboratory analysis results be obtained
-Fast elemental analysis speed

Our company guarantees the quality of the handheld X-ray fluorescence spectrometer supplied by Germany's SPECTRO XSORT.

The reasons why this instrument has received high praise in the industry are as follows:

1. Convenient. Using a battery and a small impact drill, weighing approximately 1.5kg, it can be conveniently used in any location such as construction sites, factories, laboratories, etc.

2. Non destructive. The detection process involves a beam of X-ray entering the surface of the sample, which does not cause any damage to the product after measurement.

3. Fast detection speed. It only takes three minutes to determine the alloy grade. Half a minute can accurately determine the content of nearly 40 elements in the sample.

4. Easy to operate. No need for technical personnel to receive training, once the software is set up, the content or grade can be easily and quickly determined.

5. Wide range of applications. It can be tested on more than 10 types of substrates, including ferroalloys, copper alloys, aluminum alloys, nickel alloys, tin alloys, etc.

6. Environmental testing can be conducted. As long as the program is set up, RoHS can be tested, and lead mercury cadmium chromium bromide of other materials such as plastics, metals, polymers, ceramics, etc. can be tested. And testing for halogens.

7. Good stability. Spike's instruments are well-known for their stability throughout the industry.