Digital online dissolved oxygen detection

NegotiableUpdate on 03/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief introduction: The Clark battery technology of the digital online dissolved oxygen detection system has been pre calibrated (no need for on-site calibration), and the plug and play sensor probe has strong anti fouling membrane electrode protection, simple membrane replacement, direct data report, plug and play industrial communication adapter. This dissolved oxygen sensor can be directly connected to the PLC to achieve seamless integration with the industrial control system. Any computer can be used to display data, calibrate and customize measurement systems without the need for intermediate analyzer electronic modules. The sensor probe has been pre calibrated and can replace any other type of sensor without shutting down the system; Save space, time, and cost. Measurement system performance (25 cameras)

Product Details

Details introduction:

Digital online dissolved oxygen detection system

Work environment:
PEEK or Ryton CPVC
Sensor Probe Sensor Probe
Temperature range: -5 to 50 degrees Celsius -5 to 50 degrees Celsius
*High pressure: 150 psig@50 85 degrees Celsius psig@50 Celsius
*High flow rate: 10 ft/S 10 ft/S

Power requirements (requiring Class II DC power supply):
Voltage range: DC 10-30V
*High power: 200mW
Typical power: 120mW

Structure:
Processing electrodes: gold cathode, silver anode, silver reference electrode (3-electrode polarographic Clark cell)
Membrane: FEP Teflon
Sealing ring: Viton (other materials can be used)
Sensor probe material: PEEK, Ryton or CPVC
DataStick material: 316 stainless steel, PEEK, Ryton or CPVC
Weight:
1.2 pounds=0.54kg (PEEK, Ryton or CPVC)
2.6 pounds=1.18kg (316 stainless steel)

Measurement unit:
Measurement unit: ppm,mg/l,%
Temperature units: Celsius, Fahrenheit

Calibration:
Air: automatically adjusted to the set pressure
Sample: 1 point
Zero: 1 point
Temperature: 1 and 2 o'clock
Dissolved oxygen and temperature have been pre calibrated before leaving the factory