Digital online conductivity monitoring

NegotiableUpdate on 03/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief introduction: The high-performance structure of the digital conductivity monitor has been pre calibrated (no on-site calibration required), and the plug and play sensor probe has dual electrodes for measuring high * * temperature compensation, providing multiple materials for direct data reporting. The plug and play industrial communication adapter allows the conductivity sensor to be directly connected to the PLC for seamless integration with industrial control systems. Any computer can be used to display data, calibrate and customize measurement systems without the need for intermediate analyzer electronic modules. The sensor probe has been pre calibrated and can replace any other type of sensor without shutting down the system; Save space, time, and cost. Measurement system performance (25 degrees Celsius)

Product Details

Details introduction:

Digital conductivity monitoring instrument

Work environment:
PEEK or Ryton CPVC
Sensor Probe Sensor Probe
Temperature range: -5 to 95 degrees Celsius -5 to 75 degrees Celsius
*High pressure: 150 psig@95 150 degrees Celsius psig@75 Celsius
*High flow rate: 10 ft/S 10 ft/S

Power requirements (requiring Class II DC power supply):
Voltage range: DC 10-30V
*High power: 200mW
Typical power: 120mW

Structure:
Battery constant: 0.1 resistance coefficient, 1.0 and 5.0 conductivity (5 battery electrode sizes are longer)
Electrode Material: Titanium, 316 Stainless Steel
Sealing ring: Viton (other materials can be used)
Sensor probe material: PEEK, Ryton or CPVC
DataStick material: 316 stainless steel, PEEK, Ryton or CPVC
Weight:
1.2 pounds=0.54kg (PEEK, Ryton or CPVC)
2.6 pounds=1.18kg (316 stainless steel)

Measurement unit:
Measurement unit: μ S/cm, M Ω? Cm, TDS, and%
Temperature units: Celsius, Fahrenheit

Calibration:
Zero: In dry air
Span: 1 point
Temperature: 1 and 2 o'clock
Conductivity and temperature have been pre calibrated before leaving the factory

Temperature compensation options:
Linear:% per degree Celsius
Temperature can be manually added

Other settings options:
Sensor filter: 0 to 100 seconds
Temperature filter: 0 to 100 seconds
Concentration: 10 points for users

authentication:
**And divergence: CE (EN61326 and EN61326:1998)
Safety: CE (EN 61010-1)，UL 508
Dangerous places: UL Class I, Division 2