Welcome Customer !

Membership

Help

Shanghai Yongcheng Experimental Instrument Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Condensed water test chamber

NegotiableUpdate on 02/04
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
The YC-GS255 condensation water test chamber is mainly used for the wet heat condensation aging test of automotive coatings, and for surface paint and chrome plating. The product undergoes fading and cracking aging tests. This product is specially designed for automotive interior materials
Product Details
Product Introduction

The condensate test chamber is an environmental testing equipment manufactured by Yongcheng Instrument according to corresponding standards such as DINEN ISO6270-2 and DIN50018. The equipment can perform 100% humidity testing and can also achieve comprehensive testing of low temperature, high temperature, and humidity. It is applied in industries such as aerospace, quality inspection colleges, new materials, and automotive electronics.

This product is mainly designed for the wet heat condensation aging test of automotive coatings, as well as for surface paints and chrome plating. The product undergoes fading and cracking aging tests. This product is specially designed for automotive interior materials.

Technical Specifications

model

YC-GS255

YC-GS360

YC-GS800

YC-GS1000

Inner box volume (L)

255

360

800

1000

Inner box size (W * H * D) MM

480×700×760

600×1200×500

800×1000×1000

1000×1000×1000

External dimensions (W * H * D) MM

880×900×960

1000×1400×700

1200×1200×1200

1400×1200×1200

Tray (standard)

Second Floor, Second Floor, Second Floor, Third Floor

Temperature control range

18℃~60℃

humidity range

Relative humidity 100% R.H

Temperature resolution

0.1℃

Temperature fluctuation/deviation

+2℃

display resolution

Time: 0.1 minutes; Temperature: 0.01 ℃ Humidity: 0.1% R.H;

Humidity deviation

3%R.H.~±5%R.H. (约100% R.H.)

Box material

The internal and external materials are cast in one go and the shell is cold-rolled with stainless steel 304B material for the inner liner

control system

The temperature controller adopts a LCD button type instrument, which can be tested under alternating test conditions