Carver compaction density tester mold 13mm powder density grinding tool

Carver compaction density tester mold 13mm powder density grinding tool

Carver 3619 stainless steel tablet press mold 13mm original in stock from the United States

Standing stock

Product Model: 13MM Country of Origin: United States

Brand: CARVER Product Quantity: Unlimited

Press mold for CARVER compaction density meter 4350 in the United States

Vacuum capable pellet making mold

Used to make discs or pellets required for IR and X-ray.

Stainless steel molds have suitable sizes to match vacuum

Source connection (6, 12, 13, 25, 31, and 40mm molds available for selection)

Complete with plunger, cylinder, base plug, ejector and (2) polished anvils

Constructed of 440 Stainless Steel, except ejector

Maximum applied load 18,000 pounds

During the compression process of external force, as the powder moves and deforms, larger gaps are filled, and the contact area between particles increases, resulting in attractive forces between atoms and strengthened mechanical wedging between particles, thus forming a compact with a certain density and strength

Reference standard: GB/T 24533-2019 Lithium ion Battery Graphite Negative Electrode Materials Appendix L: Test Method for Powder Compaction Density,

The calculation formula for compaction density is: compaction density=surface density/material thickness. In the design process of lithium-ion batteries, compaction density=surface density/(thickness of current collector after electrode rolling), unit: g/cm3. Compaction density is divided into negative electrode compaction density (also known as anode compaction density) and positive electrode compaction density (also known as cathode compaction density).

Our company also offers 6mm, 12mm, 13mm, 25mm, 31mm, and 40mm molds for vacuum pellet making, which can be used to produce circular discs or pellets required for IR and X-ray

Carver compaction density tester mold 13mm powder density grinding tool

#3619 American CARVER compaction density tester 13mm mold is suitable for compaction density testing of powder materials such as lithium iron phosphate and graphite, and can also be used for determining the compaction density of powders and particles with similar characteristics.

The application scenarios of Carver molds cover multiple dimensions from basic chemical analysis to new energy material testing, and some testing processes comply withNational standard specifications9encyclopedia

1. ‌spectral analysis‌Widely used for preparation‌KBr infrared tablet andXRF (X-ray Fluorescence)

   Analyze the sample and ensure that the mold material is pure to avoid contaminating the spectral signal. ‌‌‌‌

2. ‌Lithium battery material testing: used forPositive and negative electrode materials for lithium-ion batteries (such asGraphiteLithium iron phosphate‌Compaction density test, in compliance withGB/T 24533-2019

   The testing method requirements in Appendix L of "Graphite Negative Electrode Materials for Lithium ion Batteries". ‌‌‌

3. ‌Other industries: also applied toPowder metallurgyPharmaceutical (research on compression characteristics of tablet excipients)Ceramics andMagnetic materials

   Assessment of densification behavior