All stainless steel electric constant temperature water bath pot

1、 Purpose:

All stainless steel electric constant temperature water bath potUsed for distillation, drying, concentration, and warm soaking of chemical or biological products.

2、 Model and main technical parameters (using standard: GB11240-89)

IIIAll stainless steel electric constant temperature water bath potThe structure is sink type, and the sink is made of high-quality stainless steel. The cover is made of aluminum plate, and the chassis is carefully crafted from high-quality cold-rolled steel plate. The control part uses specially designed electronic temperature control, with a digital meter displaying the actual temperature inside the pot. This series of products has the characteristics of beautiful appearance, corrosion resistance, stable temperature control, energy saving and practicality, easy maintenance, and long service life.

4、 Usage and precautions

1) Safe use of electricity: This product uses a 220V AC power supply, and the power socket should use a three hole safety socket. It must be properly grounded and the grounding wire must not be connected to the gas pipe.

2) Before powering on, water should be poured into the pot above the partition. During use, the heating tube must not be exposed to the water surface, otherwise the heating tube will burn or even burst, or the solder will melt and leak water, electricity, etc.

3) Connect the power, turn on the power switch, press the SET button once, the last digit of the temperature display flashes, then press the ∧∨ button to set the desired temperature, and press the SET button again to exit the setting. The temperature controller enters automatic temperature control mode.

Our products are covered by a one-year warranty from the date of leaving the factory, with lifelong maintenance.

This instrument is strictly prohibited from dry burning and should be supervised by staff during use.