3M Newqin ATP fluorescence detection instrument for surface microbial inspection of objects

3M Newqin ATP fluorescence detection instrument for surface microbial inspection of objects

The rapid bactericidal effect detection method of ATP is based on the principle of ATP (adenosine triphosphate) triphosphate glycoside detection. ATP is an energy unit contained in all living cells of animals, plants, bacteria, fungi, yeast, etc. All living microorganisms are rich in ATP, so detecting ATP can reflect the amount of ATP in all microorganisms. After the ATP of microorganisms in the sample is extracted, it produces fluorescence under the action of luciferase and luciferin. The amount of light is proportional to ATP and can be detected by Biotrace's fluorescence analyzer. The more live microorganisms there are, the more ATP is produced, and the greater the amount of light produced, thus achieving the detection of microorganisms in the sample.

3M Newqin ATP fluorescence detection instrument for surface microbial inspection of objects

In traditional methods for detecting bactericidal effects, samples are usually taken after sterilization and then inoculated onto bacterial culture plates for 24-hour cultivation. The bactericidal effect is judged by comparing and observing the growth of bacteria before and after sterilization. This method is rigorous and accurate, but its biggest drawback is that it takes too much time. The results obtained after 48 hours cannot be adjusted immediately for the sterilization process, which may result in the sterilization effect not reaching the ideal state.

Meets the new protection standards! When used for hygiene monitoring, operators can immediately obtain key information of * * *. But not all systems are like this. We are continuously improving the 3M Newkin Clean Track hygiene monitoring and management system, redesigning it to make its performance more reliable. Through it, you can quickly prepare and pass the review. And with breakthrough technology, you can use it with confidence. Now let's learn about this system. The complete system includes a photometer and software, which can be used in conjunction with 3M Newkin Clean Track surface sampling rod ATP UXL100, 3M Newkin Clean Track enhanced water quality sampling rod, total ATP AQT200, and 3M Newkin Clean Track water quality sampling rod free ATP AQF100 to determine the degree of sample contamination.