Voltage meter (high voltage meter)

NOISEKENVoltage meter (high voltage meter)18-00086B is a device launched by NOISEKEN to measure the voltage of its electrostatic simulator. Currently, thisVoltage meter (high voltage meter)Suitable for S3011A/GT-30RA and B3011A/GT-30RA.

noisekenvoltmeter18-00086B， Used for voltage calibration of electrostatic guns in electrostatic discharge simulators,voltmeterIt is very convenient to use, as long as the electrostatic gun is placed on top, it can be easily tested.

Highest measurable 30kV Voltage.

 Voltage display or percentage display can be selected.

 satisfy IEC61000-4-2 standard 5s Measurement of Voltage MaintenanceQuantity.

parameter Functionality and performance

Input polarity ± 2kV ~ ± 30kV Setting voltage of electrostatic simulator

Voltage display accuracy

(Voltage)Display mode)±5% DC input

Display Voltage value: Seven segments LED，4 Position, polarity display: LED

buzzer built-in

Monitor output BNC Interface agreement 1/100000(Approximately 3V) input 30 kV Output accuracy: ± displayed voltage value ratio 20%

GND terminal Regarding the product casing GND There is a conductive relationship between them

Charge elimination terminal Externally shining with the product GND The conductive relationship between them

Input resistance 1TΩ±20%

voltage division ratio about 1/3333

Check the voltage setting range 2.0 kV、4.0 kV、8.0 kV、15.0 kV、20.0 kV、25 kV、30 kV*

The input voltage threshold is used to check the set voltage value 1/2

Set the range of holding time 5.0 Seconds to 30.0 second

power supply 100 V Communicate to 240 V Communication ± 10%, 50 Hz/60 H

power consumption 13VA

Working temperature range +15°C ~+35°C

Working humidity range 30% RH to 60% RH (non condensing)

size (W) 220mm x (H) 256.5mm x (D) 230mm (excluding protrusions)

weight about 2kg