High frequency noise simulator INS-4020-G545

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-frequency noise simulator INS-4020-G545 meets the Japanese JIS industrial standard, with a high voltage of 2kV and a bandwidth of up to 1 μ s. It has a built-in single-phase coupling decoupling network and additional options for various tests. Maximum test voltage: 2kV; compliant with Japanese JIS industrial standards; Pulse width adjustable from 50ns to 1000ns; The maximum repetition frequency can reach 2 seconds; built-in single-phase coupling decoupling network; Corresponding to Nissan factory standard high-frequency noise simulator

Product Details

High frequency noise simulatorINS-4020-G545

Meets Japanese JIS industrial standards, with a maximum voltage of 2kV and a maximum bandwidth of 1 μ s. It has a built-in single-phase coupling decoupling network and additional options for various tests. Maximum test voltage: 2kV; compliant with Japanese JIS industrial standards; Pulse width adjustable from 50ns to 1000ns; The maximum repetition frequency can reach 2 seconds; built-in single-phase coupling decoupling network;

High frequency noise simulatorINS-4020-G545Product Features:

Simulators use floating ground generation circuits to make installation and wiring simpler;
Short circuiting the plug and changing the insertion position allows for differential/common mode switching;
The tester is equipped with a 50 Ω terminal, which does not require additional impedance and has simple wiring;
You can set the repetition cycle and phase on the host;
The simulator has output voltage and repeat cycle scanning functions, and can be set to any step;
By using the output panel, the EUT's AC connector can be directly connected to the simulator; (Optional)
The simulator can perform radiation testing on various PCB boards through various probes, using coupling clips, adapters, and can test various circuits; (Optional)
Additional coupling network can be used for testing EUT three-phase 5-wire power supply; (Optional)

Specifications:

project		INS-4020
square wave	pulse width	50、100、200、250、400ns、 ± 10% combination, minimum 10ns ± 3ns
	output voltage	0.01~2.00kV ± 10% (below 0.1kV ± 0.04kV) 10V step
	polarity	Positive or negative
	rise time	Below 1ns
	output impedance	50 system (53.5 Ω)
repetition cycle	duration	10ms~999ms ± 10% (1ms step)
	manual	Output each time according to the phase setting of the line, and output once when there is no line input
	Line phase	50Hz/60Hz injection phase 0~360 degrees ± 10 degrees (1 degree step)
	external trigger	*EXT TRIG mode Action cycle: above 10ms Pulse width: above 1ms Input level: TTL/open circuit rectifier negative logic


Memory capacity		5 experiments
Power capacity of the tested object (EUT)		Single phase AC240V/DC60V 16A
Power supply/power consumption		AC100 ～ 240V 50Hz/60Hz/140VA
Temperature/humidity range for use		15 ～ 35℃. 　25 ～ 75℃
Size		(W) 430 × (H) 249 × (D) 420mm/approximately 19kg
High voltage coaxial joint		NMHV NOISEKEN specifications

Attachment:

name	model	quantity	description
Pulse width setting line	02-00013A	8 pieces	Replace the pulse width setting line by plugging in
SG sets short-circuit plug	02-00106A	1 piece	NMHV NOISEKEN specification plug
Output panel	18-00061B	1 piece	NMHV NOISEKEN specification panel
power cord		1 piece	Single phase terminal lifting type AC240V/DC60V 16AMax
Operation Manual		1 volume

Recommended configuration:

High frequency testing standards	model configuration	description
Japanese JIS Industrial Standards	INS-4020	High Frequency Noise simulator;
Japanese JIS Industrial Standards	ESDD	Electrostatic experimental environment;

Other testing options:

Non standard options	18-00060B	Output panel; Provide plugs for plugging in
	AT-810	Attenuator for waveform observation; Attenuator for observing pulse waveform
	CA-805B	Coupling clip (capacitive coupling); Device for testing signal lines
	H2-B	EMS probe kit; Accessories for radiation testing

高频噪声模拟器 INS-4020-G545

Reminder: The NOISEKEN INS-4020 high-frequency noise simulator has been discontinued. The replacement product model is INS-S220. Please visit the new product website for more detailed product information.