high-pressure filter

Purpose of High Pressure Filter:

Widely used for heavy metal experimental analysis and filtration in chemical engineering, coatings, petroleum, soil, environmental protection, medicine, and major universities, as well as purification of precision instruments and systems

Introduction to High Pressure Filter:

1. The filter housing is made of 316 high-grade stainless steel, which has strong corrosion resistance.

2. The filter element can withstand high pressure and synthetic oil, and can be used for equipment purification needs.

3. BSP threaded connections that comply with ISO7/1 or NPT connections that comply with ANSIB2.1.

4. Distinguish by the difference in the top cover. Liquid passes through the filter element and flows out through filtration.

Basic Parameters:

1. Material: SS316 stainless steel

2. Capacity: 2.2 liters

3. Diameter: 142mm

4. Pressure resistance: ≥ 60psi

5. Equipped with precision airtight safety relief valve

6. Fiberglass filter paper: pore size 0.7 µ m, diameter 140mm

7. Stainless steel filter: diameter 142mm, pores 0.5um

8. Inner wall micro mirror finish machining

Instructions for use precautions

1. Before use, check if the filter is clean. If there are any debris, clean it thoroughly before use.

When installing the sealing ring of the filter, please place it horizontally without wrinkles.

After installing the sealing ring, apply a small amount of pressure inside the filter to check for any leakage. If any of the above phenomena are found, please check the sealing ring and clamping bolt.

4. After use and during the use of different samples, the filter membrane should be cleaned and replaced in a timely manner.

5. After each addition of liquid, open the outlet valve for natural filtration. If the liquid is too mixed, it will affect the filtration speed. At this time, pressure filtration can be used.

6. Please use the specialized filter membrane randomly provided by our research institute during the experiment