- Phone
-
Address
No. 9-25 Jinhu Road, Jintan City
Product Categories
Changzhou Jintan Boko Test Equipment
Fully automatic flip oscillator
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Application of fully automatic flipping oscillator: The flipping oscillation instrument is suitable for the leaching toxicity flipping method of solid waste, and is widely used in environmental monitoring, solid waste disposal, and other related industries such as toxicity identification, research, treatment, and disposal of solid waste, universities, chemical industry, agriculture, health, forestry, environmental protection, soil, cement, mining, water conservancy and landfill quality inspection, food and drug analysis, and related units for testing and scientific research.
Product Details
Fully automatic flip oscillatorThe equipment simulates the process of hazardous components leaching from waste into the environment under the influence of acidic precipitation or landfill leachate after non-standard landfill disposal, storage, harmless treatment, or industrial waste entering sanitary landfills. Suitable for identifying the leaching toxicity of inorganic pollutants and volatile/non-volatile organic pollutants in solid waste. (Product counterfeiting is strictly prohibited, please do not reprint)
Technical parameters of fully automatic flip oscillator:
1. Timing range: 0-9999 minutes
2. Temperature control range: Room temperature+10-60 ℃, maximum temperature control of 60 ℃
3. Temperature control accuracy: ≤± 0.1 ℃
4. Temperature fluctuation: ≤± 2 ℃
5. Power supply; 220v50Hz。
6. Power: 500W.
7. Capacity: 2L, multiple sample bottles
8. Speed: 0-60 ± 2 revolutions per minute can be adjusted freely
）Material: Made entirely of stainless steel, with a beautiful and elegant appearance, easy to clean.
）Push pull protective cover and leak proof design ensure safe operation of the equipment.
）A reliable safety device with functions such as overload protection, leakage protection, and automatic power-off when the protective cover is opened.
）Real time temperature control with small temperature fluctuation range.
）Disk or clip on fixation ensures the sample bottle is secure.
）Speed digital display adjustment, flip mode and rotation time can be set by oneself, and the sample oscillation effect is good.
）Provide multiple flipping modes, including forward rotation, reverse rotation, forward and reverse rotation, high speed, and low speed.
）Long term continuous operation is smooth, with low noise, high load-bearing capacity, easy maintenance, long service life, and good compatibility.
）Practical containers: can hold 2L glass bottles, PE bottles, PTFE bottles, and zero empty extraction containers (ZHE).
）Various small-sized volumetric flasks and test tube type flip oscillators can also be customized as needed
Purpose: The flipping oscillation instrument is suitable for the leaching toxicity flipping method of solid waste, and is widely used in environmental monitoring, solid waste disposal and other related industries, universities, chemical industry, agriculture, health, forestry, environmental protection, soil, cement, mining, water conservancy and landfill quality inspection, food and drug analysis, and related units for toxicity identification, research, treatment, and disposal of solid waste. The equipment simulates the process of hazardous components leaching from waste into the environment under the influence of acidic precipitation or landfill leachate after non-standard landfill disposal, storage, harmless treatment, or industrial waste entering sanitary landfills. Suitable for identifying the leaching toxicity of inorganic pollutants and volatile/non-volatile organic pollutants in solid waste. (Product counterfeiting is strictly prohibited, please do not reprint)
Maintenance and upkeep of automatic flip oscillator
After each use of the equipment, it is necessary to clean the inside and outside of the equipment.
2. Regular attention should be paid to anti-corrosion measures for the plating and coating of equipment to prevent corrosion. The outer surface of the equipment can be polished with car wax.
3. The electric motor needs to be regularly inspected and cleaned, and dust should not accumulate to avoid affecting the normal operation of the motor; If there is any special noise or abnormal surface temperature (temperature rise greater than 70 ℃) during the operation of the motor, it should be stopped immediately for inspection. If the bearing is damaged, it should be replaced in a timely manner; If the impeller falls off or becomes loose, it should be tightened; If the positioning fasteners of the motor become loose and cause displacement, they should be reset; If there is a lack of lubricating oil, calcium sodium based grease can be used for lubrication. Please pay attention to maintenance
Technical parameters of fully automatic flip oscillator:
1. Timing range: 0-9999 minutes
2. Temperature control range: Room temperature+10-60 ℃, maximum temperature control of 60 ℃
3. Temperature control accuracy: ≤± 0.1 ℃
4. Temperature fluctuation: ≤± 2 ℃
5. Power supply; 220v50Hz。
6. Power: 500W.
7. Capacity: 2L, multiple sample bottles
8. Speed: 0-60 ± 2 revolutions per minute can be adjusted freely
）Material: Made entirely of stainless steel, with a beautiful and elegant appearance, easy to clean.
）Push pull protective cover and leak proof design ensure safe operation of the equipment.
）A reliable safety device with functions such as overload protection, leakage protection, and automatic power-off when the protective cover is opened.
）Real time temperature control with small temperature fluctuation range.
）Disk or clip on fixation ensures the sample bottle is secure.
）Speed digital display adjustment, flip mode and rotation time can be set by oneself, and the sample oscillation effect is good.
）Provide multiple flipping modes, including forward rotation, reverse rotation, forward and reverse rotation, high speed, and low speed.
）Long term continuous operation is smooth, with low noise, high load-bearing capacity, easy maintenance, long service life, and good compatibility.
）Practical containers: can hold 2L glass bottles, PE bottles, PTFE bottles, and zero empty extraction containers (ZHE).
）Various small-sized volumetric flasks and test tube type flip oscillators can also be customized as needed
Purpose: The flipping oscillation instrument is suitable for the leaching toxicity flipping method of solid waste, and is widely used in environmental monitoring, solid waste disposal and other related industries, universities, chemical industry, agriculture, health, forestry, environmental protection, soil, cement, mining, water conservancy and landfill quality inspection, food and drug analysis, and related units for toxicity identification, research, treatment, and disposal of solid waste. The equipment simulates the process of hazardous components leaching from waste into the environment under the influence of acidic precipitation or landfill leachate after non-standard landfill disposal, storage, harmless treatment, or industrial waste entering sanitary landfills. Suitable for identifying the leaching toxicity of inorganic pollutants and volatile/non-volatile organic pollutants in solid waste. (Product counterfeiting is strictly prohibited, please do not reprint)
Maintenance and upkeep of automatic flip oscillator
After each use of the equipment, it is necessary to clean the inside and outside of the equipment.
2. Regular attention should be paid to anti-corrosion measures for the plating and coating of equipment to prevent corrosion. The outer surface of the equipment can be polished with car wax.
3. The electric motor needs to be regularly inspected and cleaned, and dust should not accumulate to avoid affecting the normal operation of the motor; If there is any special noise or abnormal surface temperature (temperature rise greater than 70 ℃) during the operation of the motor, it should be stopped immediately for inspection. If the bearing is damaged, it should be replaced in a timely manner; If the impeller falls off or becomes loose, it should be tightened; If the positioning fasteners of the motor become loose and cause displacement, they should be reset; If there is a lack of lubricating oil, calcium sodium based grease can be used for lubrication. Please pay attention to maintenance
