data acquisition system

data acquisition system

including 1 3-slot host and 9 optional plug-in modules. You can use Keysight BenchVue DAQ software or the intuitive graphical front panel (including task oriented self guided menus) to manipulate this DAQ system. The DAQ970A/DAQ973A data acquisition system can perform high-quality switch switching and is equipped with an advanced six and a half digit multimeter, allowing you to accurately measure.

• 3-slot host with USB and LAN interfaces

• Six and a half bit (22 bit) built-in digital multimeter, combined with a new solid-state multiplexer module, can scan up to 450 channels per second

• 9 types of plug-in switches and control modules for you to choose from

• By using the new DAQM909A 4-channel digitizer module, a 24 bit sampling rate of 800 kSa/s can be achieved

• The scanning speed of the new DAQM900A solid-state multiplexer can reach up to 450 channels per second

• Capable of measuring ultra-low current (1 μ A DC and 100 μ A AC) and higher resistance (1000 M Ω)

• The built-in signal conditioning function can measure thermocouples, RTDs and thermistors, DC/AC voltage and current, resistance, frequency/cycle, diode testing, and capacitance

• Non volatile memory can store 100000 readings and retain data even in the event of a power outage

• Each channel has upper and lower limit alarm functions, as well as 4 TTL alarm outputs

• The instrument now comes with a built-in BenchVue software license (BV0006B). BenchVue can help you easily connect and control instruments, automatically execute test sequences

• The new automatic calibration function can compensate for internal drift caused by time and temperature changes

• 3497XA Compliance Testing, Programs, and Configuration