Zirconia oxygen analyzer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The OXITEC economical oxygen analyzer (economical) consists of a probe, a cable, and an electronic instrument. As the entry-level model in the OXITEC oxygen analyzer series, the economical analyzer is also suitable for all combustion chambers. The Z-high measuring gas temperature can reach 1400 ° C, and the probe is made of high-quality materials. Over the years, the oxygen analyzer has been successfully used in tens of thousands of gas analysis systems, so our product is worthy of your trust. In addition, our probes offer high durability and low operating costs, allowing you to earn more profits. Zirconia oxygen analyzer

Product Details

　　Zirconia oxygen analyzerENOTEC's welding technology enables the probe to obtain a larger active surface, ensuring that the gas analyzer can quickly and accurately measure oxygen over the years. The OXITEC economical probe is an affordable oxygen analyzer suitable for steam boilers fueled by natural gas or oil in new energy power plants or the shipbuilding industry. The economical gas analyzer is pre assembled by the manufacturer and equipped with a simple socket system for installation - it can be directly plugged into a power source for use. A filter head composed of standard sintered materials enables the sensor to measure oxygen in high dust gas environments. The system comes with a calibration interface that allows users to confirm measurement values at any time. The OXITEC economical analyzer is widely recognized and used for its reliability and durability. Its excellent quality eliminates the need for frequent maintenance or replacement of parts for users.

　　Zirconia oxygen analyzerTechnical parameters

　　Probe insertion depth up to 1000mm; O2 range ppm to 100% O2; measurement accuracy+/-0.2% measurement value; Reaction time 0.5 seconds (airflow speed>10m/s), measure gas temperature to 400 ° C to 1400 ° C (with cooling protection tube), ambient temperature -40 ° C to 80 ° C (probe) -20 ° C55 ° C (electronic instrument) interface HART, RS485 FILDBUS, MODBUS RTU, RS232; Protection code probe IP20, electronic instrument IP66.

OXITEC ® Economy oriented - Electronic Instruments
Shell:	ST37 powder coating on steel sheet RAL6029 (GFK - Different Options)
Protection code:	IP66
Display:	LC point matrix 240 * 64- LED internal light source
Keyboard:	membrane keyboard
LED signal:	Warning - Orange, Maintenance - Orange, Error - Red
O2 measurement range:	0.00 to 25.00 vol.% O2
accuracy:	Measurement value ± 0.2%
Reaction time:	At the inlet end of the probe, a 100mV change takes less than 200ms
Voltage	230V ± 10%, 50 to 60 Hz 115V ± 10%, 50 to 60 Hz
power waste:	350 VA (heating phase) 200 VA (typical measurement mode)
Recommended fuses:	10A
Export end signal O2:	Magnify, 0/4 to 20mA The maximum load is 500 Ω
Relay contacts:	24V AC/DC, 1A
Size:	300 x 440 x 240 mm (width x height x depth)
Weight:	About 17 kilograms
Storage temperature range *:	-40 ° C to+80 ° C
Working temperature range *:	-20 ° C to+55 ° C

OXITEC ® Economy type - probe
Temperature measurement:	The maximum temperature is 400 ° C To 1400 ° C (with cooling protection tube)
On site insertion depth:	Up to 500 mm
Insertion depth with cooling protection tube:	500mm / 1000mm For other lengths, please inquire with our company
Measurement principle:	zirconium oxide
Measure gas pressure:	-50 to+50 mbar (For other information, please inquire with our company)
Airflow velocity:	0 to 50m/s
ambient temperature	-40 ° C to+80 ° C
Reaction time (O2):	0.5 seconds (measuring gas flow rate>10m/s)
T90- Time (O2):	5.0 seconds (measuring gas flow rate>10m/s)
Probe material:	V4A (DIN 1.4571 / SS316Ti)
Protection code:	IP20
Detection accuracy:	< 1ppm O2
Voltage supply:	Through electronic instruments