- Phone
-
Address
Room 2222, Building B, Shangao Century, Xisanqi, Haidian District, Beijing
Product Categories
Beijing Hanjie Tech Instrument Co., Ltd
Chlorine moisture analyzer
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
UE200 is an analytical instrument developed by our company specifically for measuring the moisture content of chlorine gas and hydrogen chloride in the chlor alkali chemical industry and its downstream industries. It uses traditional electrolysis principles to measure the moisture content in gases. It has the characteristics of sensitive detection limit, able to measure moisture content of 0.01ppm, accurate measurement, fast response, low maintenance, sturdy and durable, and resistant to chlorine and hydrogen chloride corrosion. Chlorine moisture analyzer
Product Details
Chlorine moisture analyzerCharacteristics:
Measure trace amounts of water in corrosive gases such as CL2, HCl, HF, HBr, H2S, etc.
Short response time
Ø High sensitivity
Ø Multi functional LCD large screen display
Micro water analysis instrument controlled by microprocessor
Zero point and range calibration
Ø Automatic range selection, remote control
Ø RS232 serial port
Ø Two alarm nodes
Ø Automatic startup check
Chlorine moisture analyzerWorking principle: Due to the extremely small current required for electrolyzing trace amounts of water, the circuit part uses high-tech solid-state computing circuits. It can ensure accurate and stable measurement. The minimum detection line can reach several ppm.
Measurement principle: The phosphorus pentoxide electrode generates hydrogen and oxygen through electrolysis of water, and the water content can be calculated by calculating the electrolysis electricity. The electrode consists of two metal wires wound parallel at equal distances on a glass rod. Platinum or rhodium wire is usually used. A thin layer of phosphoric acid solution is evenly coated between the metal wires. Electric current decomposes water into hydrogen and oxygen. The final result of electrolysis is the conversion of phosphoric acid into phosphorus pentoxide. Phosphorus pentoxide is a chemical substance that can strongly absorb water and can absorb water from sample gases. By continuously electrolyzing water, a balance is established between the moisture in the sample and the electrolyzed water. The current between the electrodes is proportional to the moisture content of the sample gas. The moisture content can be read through a monitor.
After long-term use, the electrode can be manually regenerated on site, eliminating the hassle of returning to the factory for maintenance work.
Technical parameters:
Range: 0-10ppm, 0-100ppm, 0-1000ppm, 0-2500ppm. Special ranges can be customized.
Sensitivity:+/-0.1% FS
Signal output: 020mA, 420mA, 010V.
Serial port: RS232 modem
Display: LCD display
Operating temperature: -1050 ℃
Voltage: 220V/50Hz
Power: 8W
Sample gas flow rate: 100L/H
Gas pressure: 0.1-1.5 bar
Sample gas temperature:+5 ℃+150 ℃
Response time:<1 second
T50:<8 seconds
Accuracy:+/-1%
Reproducibility:+/-0.1%
Environmental temperature:+565 ℃
Cable length: 2300 meters
外形尺寸：120mm高/直径40mm
