YHT-5118B Key Life Testing Machine (Pneumatic)

1YHT-5118B Key Life Testing Machine (Pneumatic)Purpose:

This machine is a specialized equipment used for fatigue testing of electronic product buttons. Suitable for various button pressure load durability life tests. Reasonable design, convenient clamping, and reliable. Applicable standard: YD/T 1539-2006.

IIYHT-5118B Key Life Testing Machine (Pneumatic)Technical parameter description:

1. A complete machine platform with 2 independent testing stations (1, 4, 6 stations can also be selected), capable of testing 2 workpieces. One control system is used to control the independent testing of the two workpieces, with one screen for each set of conditions. It is necessary to convert the test conditions and results into one screen, which does not affect mutual testing and is equivalent to independent control.

2. Each sample can test 6 keys (which can be pressed simultaneously or continuously, for example, pressing 6 keys in the order of 1-2-3-4-5-6 is considered as one testing cycle).

3. A separate fixture can be used to position and adjust test samples of different sizes and heights. The effective size of the sample is 150-210-300 (width, depth, and height).

4. Each sample can be independently controlled and run without being restricted by other mobile phones.

5. The controller can control the pressing time of the cylinder, such as testing the power on and off, simulating the actual situation of key testing, pressing and holding for a few seconds to start the machine, and then lifting it up after the machine responds to the power on, and then pressing and holding it again for a few seconds to perform the shutdown action. The time required for each action can be adjusted according to different samples (the holding time for the test head to descend, rise, etc. can be adjusted).

6. The test head has a hemispherical contact and is required to be made of silicone material with a Shore hardness of A55.

7. The controller is touch sensitive, with a simple and easy to understand operating interface.

8. Dual cylinder filter.

9. The button test head and motion cylinder can be removed for cleaning purposes.

10. The controller is designed for the operator and integrated with the entire machine, simple and elegant.

11. The machine material is stainless steel matte surface, with positioning fixtures, reliable quality, and beautiful appearance.

12. Test speed: reaching 10-60 times/minute.

13. Test frequency: 100000 consecutive button tests.

14. Button pressure: 0.1N to 10N.

15. Dimensions: 700 × 410 × 550mm

16. Weight: 35kg

17. Power supply: AC220V/50HZ