PD-320 Single Wing Drop Test Machine

PD-320 Single Wing Drop Test MachinePurpose:

The single arm drop testing machine is specifically designed to test the damage to product packaging caused by falls and evaluate the impact resistance during transportation and handling.

Applicable standard: ISO2248 JISZ0202-87 GB/T4857.5-92.

PD-320 Single Wing Drop Test MachineMachine features:

The single arm drop testing machine can perform free drop tests on the surface, corners, and edges of packaging, equipped with a digital height display instrument and a decoder for height tracking, so as to accurately provide the product drop height, with an error of no more than 2% or 10MM from the preset drop height. The machine adopts a single arm double column structure, with electric reset, electric drop, and electric lifting devices, making it easy to use; The buffering device greatly improves the service life, stability, and safety of the machine. Single arm setup for easy placement of products.

Main technical parameters:

1. Drop height mm: adjustable from 300-2000

2. Test piece weight kg: 0-80kg;

3. Bottom plate thickness: 10mm (solid iron plate)

4. Test piece size mm：800 x 800 x 1000

5. Impact panel size mm：1700 x 1200

6. Drop height error: ± 10 mm

7. Dimensions of the test bench mm： About 1700 x 1200 x 2615

8. Net weight kg： About 300 kg；

9. Test method: Full square drop of surface, corner, and edge

10. Control mode: electric

11. Falling height error: 1%

12. Parallel error of striking panel: ≤ 1 degree

13. Error between the falling surface and the horizontal angle during the falling process: ≤ 1 degree

14. Power supply: 380V1, power supply: AC380V 50HZ

15. Power: 1.85KWA

Requirements for Machine Studio Environment

Temperature: 5 ℃~+28 ℃

[1] (Average temperature within 24 hours ≤ 28 ℃)

Relative humidity: ≤ 85% RH

Power supply conditions: three-phase four wire+protective earth wire

Voltage range: AC (380 ± 38) V