XGB-5 (3KW) Vortex Fan

XGB-5 (3KW) Vortex FanCircular high-pressure blower is a new type of universal power air source equipment that meets the needs of various industries' production and operation activities, and complies with safety and environmental protection standards; The casing of the fan adopts gravity die-casting technology, which makes the product of better quality, lower weight, and easier installation; The motor adopts composite national IEC standardization requirements, which facilitates customers to modify and maintain according to their own requirements; The fan is equipped with a 50/60Hz broadband motor, and different voltage specifications can be selected according to different customer needs; Fengruida high-pressure fans are divided into high air volume and high pressure series, providing customers with more flexibility in their selection.

XGB-5 (3KW) Vortex Fanspecification

Three phase voltage power: 0.25 KW、0.4KW、0.7KW、0.85KW、1.1KW、1.3KW、1.5KW、1.6KW、2.2KW、3KW、4KW、5.5KW、7.5KW、8.5KW、11KW、12.5KW、15KW、18.5KW、20KW、25KW； Single phase voltage power: 0.2KW, 0.4KW, 0.55K, 0.75KW, 0.85KW, 1.1KW, 1.3KW, 2.2KW; Wind pressure: 50mbar-1010mbar; Airflow: 40m3/h-3000m3/h. For the convenience of selecting different specifications, both single-stage and two-stage models are available in stock; Frequency: 50HZ/60HZ Voltage: 110V-615V, suitable for use in all countries. If special voltage is required, it can be customized according to requirements; Pressure relief valve: RV-01 RV-02 (for use with); Filters: MF08, MF10, MF12, MF16, MF20, MF32; Muffler interface sizes: 1.25 inches, 1.5 inches, 2 inches, 2.5 inches, 4 inches.

Working principle of vortex blower

After the power is turned on, the fan rotates. Due to the groove design of the impeller, it will drive air flow. Therefore, air enters the pump body through the air inlet, and the air is stirred inside. Each groove is pressurized in a vortex like manner, circulating one after another, and finally forming * airflow energy, which is discharged from the pump body through the outlet for use.

Structural characteristics of annular high-pressure blower

1. Aluminum die-casting impeller: generates stable airflow and efficient flow rate; 2. Dynamic balancing impeller: smoother operation, no vibration during operation; 3. Double covered bearings: prevent grease leakage and increase the reliability of operation; 4. Dustproof shaft seal: prevents dust intrusion and extends bearing life; 5. The combination of motor spindle and impeller inlay: without the need for connectors, belts, or gears, there is no concern of breakage or wear; 6. 50/60HZ and wide voltage design: reduces the manufacturer's inventory demand for 220V to 660V voltage; 7. High efficiency cooling fan: effectively cools the motor and air pump, enabling them to operate efficiently and with low noise; 8. Embedded thermal protector (optional): more effective in preventing motor overheating and enhancing product reliability; 9. Miniaturization design: allowing users to use and install space more effectively; 10. Detachable pipe fittings (optional): easier to install.