Wholesale of Airflow Popularity Tester and Water Mist Generator

Smoke generator airflow popularity testerWater mist generatorOverview

Suitable for capturing and recording airflow patterns in clean rooms and local clean environments.

According to ISO14644-3 and the new GMP, the evaluation of airflow direction is required for the acceptance of clean rooms.Smoke generator airflow popularity testerWater mist generatorIt can generate high concentration water vapor (particle size range: 1-10 μ m, concentration above 80%), with high visibility and no pollution. When water vapor is emitted in the clean room, there are no detectable residual substances. Y09-010 is suitable for semiconductor and pharmaceutical cleanrooms.

Product Features:

*Smoke continuously for more than 50 minutes

*Can be connected to a smoke pipe to produce curtain shaped smoke (can be extended up to 2 meters)

*Low noise

*Pure spray without pollution

*Used for testing in purification workshops ranging from 1 to 10000 levels

Product application:

*Clean room laminar flow test

*Airflow balance test

*Chemical treatment equipment exhaust system testing

*Verification of personnel safety evacuation system

*Balance of pressure inside and outside the room

*Leakage testing of air ducts

Basic parameters and technical indicators

External power supply: AC 220V 50Hz

Optimal capacity for adding water to the inner box at once: 2500ml

Product host size: 280 × 265 × 300 mm (length × width × height)

Net weight of the host: 9Kg

Smoking component input voltage: DC 45V

Rated power consumption: 210W

成雾量: ≥5500ml/h

雾化粒径：1-10微米

Smoke output rate: 0.95m3/min

Jiajia water volume: 1200 ml

Optimal atomization water level: 28mm

Fog height: 120-150mm

Applicable water conductivity: 0.15~1.00 ms/cm

The relationship between fog generation and working water level