Bottle mouth distributor, quantitative liquid dispenser

1、 Characteristics:

On the liquid dispenser.The one-way piston and glass plunger are precision ground.good sealing performance.Ensured the accuracy of the liquid addition amount. Easy to use liquid dispenser.reliable.Low repeatability.high efficiency.The material of the liquid component connected to the liquid dispenser is glass and polypropylene,No chemical reaction occurs with general chemical reagents.

IITechnical Specifications:

3、 Usage: (Corrosive liquids are not acceptable)

1. Insert the plastic inlet pipe into the bottom bottle, screw in the plastic outlet nozzle, and rotate the socket screw on the glass bottle containing the liquid.

2. Move the quantitative adjustment pointer to the scale of the required amount of liquid to be added, and tighten the fixed scale pointer. Just move up and down2-3After the air inside the sleeve is expelled, it can be used.

3. If high accuracy is required for capacity, the capacity method can be used for calibration. During calibration, simply move the scale pointer until the capacity reaches the desired value.

4. Maintenance method

If not used for a long time, the liquid dispenser must be pumped several times with clean liquid to clean the piston and plunger, in order to prevent them from getting stuck.

5. Notes:

When using liquids with crystals or impurities, a filter screen should be tied at the end of the inlet pipe to prevent solid substances from jamming the piston and plunger, affecting the accuracy of the liquid addition and normal use.

Selection of reagent bottle specifications: Bottles can be matched500ml 1000mlWait.