-
E-mail
ahbeq888@163.com
-
Phone
17305697718
-
Address
Beike Feixi Base, No. 6 Yixiu Road, Hefei City, Anhui Province
Product Categories
Anhui Beike Equipment Technology Co., Ltd
Vertical fluidized bed multi walled carbon nanotube preparation equipment
NegotiableUpdate on 12/28
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1. The gas is preheated by a gas preheating furnace before entering the fluidized bed reaction chamber, which can reduce the impact of a large amount of cold air flow entering the chamber on the process. $r$n2、 The reactor outlet is equipped with a stirring device to prevent carbon pipes from clogging at the reactor outlet. $r$n3、 A temperature measuring thermocouple is installed near the inlet to control the temperature of the inlet. $r$n4、 The inlet is movable and can be adjusted up and down according to the temperature required by the process. $r$n5、 Install a rotatable filter screen at the exhaust outlet of the collector, with the filter screen blocked.
Product Details
1. The gas is preheated by a gas preheating furnace before entering the fluidized bed reaction chamber, which can reduce the impact of a large amount of cold air flow entering the chamber on the process.
2. The reactor outlet is equipped with a stirring device to prevent carbon pipes from clogging at the reactor outlet.
3. A temperature measuring thermocouple is installed near the inlet to control the temperature of the inlet.
4. The inlet is movable and can be adjusted up and down according to the temperature required by the process.
5. Install a rotatable filter screen at the exhaust outlet of the collector, with the filter screen blocked.
Furnace tube material |
quartz tube |
Furnace tube size |
Φ300mm (outer diameter) |
heating element |
resistance wire |
Operating Temperature |
≤1100℃ |
Temperature Control System |
30 segment programmable temperature control, PID parameter self-tuning, operation interface controlled by LCD touch screen |
temperature control accuracy |
±1℃ |
Heating zone length |
300+300+300+300+300mm (5 temperature zones) |
| pneumatic system | Internally equipped with 5 high-precision mass flow meters to accurately control gas flow rate, proportioning according to requirements |
accuracy |
±1.5% |
linear |
±0.5～1.5% |
repeatability accuracy |
±0.2% |
response time |
Gas characteristics: 1-4 Sec, electrical characteristics: 10 Sec |
Pre vacuum pump pumping speed |
60m³/H |
Length of heating zone in gas preheating furnace |
300+300+300mm |
Preheating furnace heating element |
resistance wire |
Preheating furnace coil material |
310S |
