Vacuum disperser

Structural characteristics of vacuum disperser：
1. Structure of single arm hydraulic shaft lifting system.
2. Carefully designed mixing and dispersing structure ensures even mixing without any dead corners.
3. Vacuum degassing, no bacterial contamination.
4. According to the process requirements, power distribution heating, steam heating, and water cooling devices can be used.
5. The parts of the vacuum disperser in contact with the material are all made of stainless steel material.
6. The particle size of the dispersed material is 1-2 μ m.
7. The specifications of the vacuum disperser can be designed and manufactured according to customer requirements.
8. The vacuum system is equipped with a vacuum pump, which draws vacuum from the top cover.
9. The inner rapid mixing shaft is a toothed mixing blade, equipped with an independent motor and a frequency converter to control the speed. The operating speed is 0-1500rpm.
The middle stainless steel mixing shaft is a butterfly shaped blade with scraper blades, and the motor is equipped with a 1:30 reducer and a frequency converter to control the speed. The operating speed is 0-200rpm.

Technical parameters of vacuum disperser：

1. Motor power: 1.5kw, 2.2kw, 3kw, 4kw
Lifting stroke: 900mm
Dispersion disk diameter: Ø 150mm or Ø 200mm

2. Motor power: 5.5kw, 7.5kw, 11kw
Lifting stroke: 1200mm
Dispersion disk diameter: Ø 200mm or Ø 250mm

3. Motor power: 15kw~30kw
Lifting stroke: 1200mm
Dispersion disk diameter: Ø 300mm or Ø 350mm

4. Vacuum disperser motor type: ordinary/explosion-proof
5. Speed regulation method of vacuum disperser: frequency conversion speed regulation
6. Standard configuration of vacuum disperser: control cabinet, hydraulic system, vacuum system, vacuum cylinder

notesThere is also a planetary vacuum disperser available, as shown in the figure on the right: