Ultrasonic immersion C-scan microscope

Ultrasonic scanning microscope is a non-destructive testing tool that mainly uses high-frequency ultrasonic waves to detect various types of water-cooled plate brazing, vacuum diffusion welding, and material bodies. It is very sensitive to the bonding layer and can detect defects such as pores, cracks, inclusions, and delamination inside the sample, and visually display them in the form of graphics.

Product Introduction

Ultrasonic scanning microscope is a non-destructive testing tool that mainly uses high-frequency ultrasonic waves to detect various types of water-cooled plate brazing, vacuum diffusion welding, and material bodies. It is very sensitive to the bonding layer and can detect defects such as pores, cracks, inclusions, and delamination inside the sample, and visually display them in the form of graphics.

scanning mode

·A. B, C scan · Transmission scan

. Layer by layer scanning · Multi layer scanning

·Contour scanning and data acquisition scanning

·Tray scanning · Double head C-SAM

performance parameters

·Ultrasonic transducer adaptation range: 0.5~50MHz

·CS1 X/Y scanning detection range: 400mmx400mm/GRD X/Y scanning detection range: 1200mmx700mm (customizable fully automatic equipment)

·Z-direction focusing stroke: 100-300mm

·Maximum scanning speed: 1000mm/s

·Sampling rates: 1G/s, 1.5G/s, 3G/s

·Optional scanning axis maximum resolution: 1 μ m

·Scanning axis positioning accuracy: ± 5um

·Thickness measurement range: Material 0.3-50mm (recommended probe 10/15/25/30M)

·Software: NDTS technology software

Software functions: Calculation of brazing rate and defect calculation

Application field

·Brazing of water-cooled plates, vacuum diffusion welding of radiators, composite material plates, plastics, metals, ceramics, etc

equipment image