Ultrapure Water Polishing System

NegotiableUpdate on 02/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The core component of the laboratory ultrapure water machine, the RO membrane, is selected from Dow Chemical Company in the United States, and the polishing mixed bed resin is selected from Dow Chemical Company/Rohm and Haas in the United States to better ensure the quality of the produced water; Real time monitoring of water quality, management and alarm of consumables, and traceability of data.

Product Details

Ultrapure Water Polishing SystemProduct Selection

·Using municipal tap water, distilled water or purified water as the water source, pure water and ultrapure water can be directly produced, with a water production rate of 5-30 liters/hour and an ultrapure water resistance rate of>18.2M Ω. cm

Product advantages

·The core component RO membrane is selected from Dow in the United States, and the polishing mixed bed resin is selected from Dow/Rohm and Haas in the United States to better ensure the quality of the produced water

·Real time monitoring of water quality, management and alarm of consumables, and traceability of data

·7.0-inch touch screen display, full real-time animated working mode display

·Online 2/3 channel water quality monitoring, real-time monitoring of the water quality status of raw water, RO pure water, and UP ultra pure water

·Multiple water intake methods are available, including manual water intake, timed/quantitative/qualitative water intake, and diverse water intake modes

·The replacement cycle of PC pre-treatment column, RO reverse osmosis column, UP purification column, UV lamp, UF ultrafiltration membrane, EDI module can be set by oneself. The system can automatically store historical alarm records, historical water quality information, consumables usage, user operation records, etc. USB data export, computer and mobile phone can be remotely operated

Ultrapure Water Polishing Systemparameter

Product Name	Standard reagent type	Low organic matter type	Heat removal prototype	comprehensive
Produced water quality	Primary water, secondary water, tertiary water
Product Model	UP (5-30)01/02-R	UV (5-30)01/02-R	UF(5-30)01/02-R	UVF (5-30)01/02-R
working conditions	Inlet water: municipal tap water TDS ≤ 400ppm, inlet pressure: 0.15Mpa-0.4Mpa, temperature range: 5-45 ℃ When the TDS of the inlet water is greater than 400ppm, it is recommended to choose a pre softener. The TOC content (ppb) of the purified water inlet water should be ≤ 50PPb, and the conductivity should be ≤ 5-10 μ S/cm
Conductivity (μ S/cm)	≤0.06	≤0.055
Electrical resistivity (M Ω. cm)	15-18.2	≥18.2
TOC content (ppb)	≤30	≤5	≤10	≤2-5
Endotoxin content (EU/ml)	-	-	≤0.001
Particulate matter (0.22 μ m)	<1/ml
Bacteria (CFU/ml)	≤1
heavy metal ion	<0.01ppb
Water intake flow rate (L/min)	1-2
Water production capacity (L/H)	5-30
Soluble Silicon (SiO2) (mg/L)	<0.01
Absorbance (254nm, 1cm optical path)	<0.001