Ultra high precision ring plug gauge

Ultra high precision ring plug gaugeIntroduction:

Edmund standard ring gauge plug gauge - Edmund manufacturing ring gauge, plug gauge, stop and go gauge, and various other standard gauges

ring gauge

Double headed plug gauge

Cone locking single head plug gauge
Chuck type plug gauge
Progressive plug gauge
Standard cylinder

Perform 6 point calibration

Correct ring gauge inspection requires verifying the six independent positions of the ring gauge to determine its size and geometric shape. The third point measurement is taken at the top, center, and bottom of the x-axis (left figure), and then the ring gauge is rotated 90 degrees so that the y-axis is horizontal. Then, the top, center, and bottom positions of the y-axis are measured (right figure). The measurement position is at the center of the ring gauge and 1/16 inch below the guide angle of the ring gauge end face. The XXX level standard only measures the middle. This comparison measurement will display any deviation on the order of one millionth or one hundredth of an inch, and will be recorded in the calibration certificate of the environmental gauge.

Ultra high precision ring plug gaugeFeatures:

Carefully selected materials, special processing, and heat treatment

Hardness greater than HRC62

High and low temperature treatment, aging treatment, precision grinding, NIST transmission standard, size and shape errors less than+/-0.1um