UV aging testing machine

NegotiableUpdate on 12/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The UV aging testing machine uses fluorescent UV lamps to simulate the effect of sunlight exposure, and uses condensed moisture to simulate dew. The tested material is placed in a cyclic program of alternating light and moisture at a certain temperature for testing, and accelerated weathering tests are conducted on the material to obtain the results of material weathering.

Product Details

Product Introduction:

The UV aging testing machine can simulate environmental conditions such as UV, rain, high temperature, high humidity, condensation, and darkness in natural climate. By reproducing these conditions, it can merge them into a cycle and automatically complete the cycle.

This is the working principle of the UV aging test chamber. During this process, the device can automatically monitor the temperature of the blackboard and sink; By configuring the irradiance measurement and control device (optional), the irradiance can be measured and controlled to stabilize at 0.76W/m2/340nm or a specified set value, and extend the service life of the lamp.

紫外老化测试机

UV aging testing machine parameters:

Product Model: HT-4522-X

Studio size: L1100mm × W550mm × H350mm

Dimensions: Approximately L1300mm × W660mm × H1720mm

Distance between lamp and product: adjustable (not exceeding 350mm)

Distance from the parallel surface of the test piece to the lamp surface: approximately 50mm

Wavelength range: UV-A wavelength range of 315-400nm or UV-B wavelength range of 290-315nm

Radiation intensity: 0.3-1W/m2/nm

Temperature resolution: 0.1 ℃

Light temperature range: 50 ℃~70 ℃/temperature tolerance is ± 3 ℃

Condensation temperature range: 40 ℃~60 ℃/temperature tolerance is ± 3 ℃

Blackboard thermometer measurement range: RT+10-80 ℃/tolerance ± 1 ℃

Temperature control method: PID self-tuning temperature control method

Effective irradiation area: 1100 * 550mm

UV aging testing machineIt is a reliable testing equipment that focuses on simulating the UV aging effect in natural environments, widely used in industries such as materials, coatings, plastics, rubber, textiles, etc.

The principle is to simulate short wave ultraviolet rays in sunlight through ultraviolet lamps, combined with temperature and humidity control systems, to quickly reproduce the aging process of materials during long-term outdoor use, such as fading, cracking, brittleness, and strength reduction.

The device has irradiance control and cyclic aging program functions, which can significantly shorten the years required for natural aging according to different testing schemes. Material aging data can be obtained in just a few days to weeks.

Through the detection of this device, the formula design is optimized and high-quality materials are screened to provide support for product quality control.