Two fluid spray dryer

Product Name: Pulse Dust RemovalTwo fluid spray dryer
Product Model:YM-10LMC
Prices on this website:428000
Product brand: Yuming brand
YM-10LMCtypetwo-fluidSpray dryer
1、 Working principle
The air passes through the filter and heater, and enters the hot air distributor at the top of the drying chamber. The hot air enters the drying chamber uniformly in a spiral shape. The feed liquid passes through the filter and is pumped to the centrifugal spray head at the top of the drying chamber, which is sprayed into tiny atomized droplets. It contacts the hot air with a large surface area, and the water evaporates rapidly. It is dried into granular products in a very short time. The wet waste gas captured in the tower bottom and cyclone separator is discharged to the outside by the fan.
2、 Characteristics and Applications
1Fast drying speed, the material liquid passes throughtwo-fluidThe surface area of spray is greatly increased, and it can evaporate instantly in the high temperature airflow95-98%Moisture, drying time only takes a few seconds.
2Suitable for heat sensitive materials. Due to the parallel flow of liquid droplets and hot air, although the temperature of the hot air is high, the material will not overheat when water evaporates.
3Widely applicable. A large number of materials with significant differences in physical properties are produced using this method. Such as polymers and resins; Dyes and pigments; Ceramics and glass; Rust removers and insecticides; Carbohydrates; Dairy products category; Blood and fish products category; Fertilizers; Organic and inorganic compounds; Wait.
4The product has good dispersibility, fluidity, and solubility. This is because drying is completed instantly, and the product can maintain uniform fine particles.
5The production process is simplified and the operation control is convenient. For moisture content40-60%(Special materials can be reached)90%）The solution can be dried into a powdered product in one go, without the need for further crushing and screening after drying, reducing production processes and improving product purity. Within a certain range, the particle size, bulk density, and moisture content of the product can be adjusted by changing the operating conditions, making control and management very convenient.
3、 Main technical parameters
◆ Color large touch screen operation, combining fully automatic control and manual control, Chinese and English panel, parameter LCD display.
Real time controlPIDConstant temperature control technology, accurate temperature control, heating temperature control accuracy ±1℃。
◆ The spray, drying and collecting device adopts double mirror surface with high quality304Made of stainless steel material The spray drying room is equipped with an observation port.
◆ With the atomization structure of centrifugal spray, the particle size of powder is normally distributed, and the fluidity is good.
The feeding amount can be adjusted through the feeding peristaltic pump.
◆ Protection function, the fan cannot start and the heater cannot start.
Equipped with air inlet filtration to ensure sample purity.
◆ Equipped with a touch screen for setting the air pulse filter1-9999Pulse once per second to prevent filter blockage and improve sample collection rate, resulting in clean air at the discharge outlet.
The dried product has uniform particle size,95%The above dry powders are of the same particle size.
1Inlet temperature ≤30-300℃
2Export temperature<30～140℃
3Water evaporation rate200-10L/h
4Two fluid nozzle1.5mm
5Heat source: Electricity
6Electric heating power36kwTotal power:42kw
7Dimensions: length x width x height（mm）：3000×1400×3500Dry powder recycling ≥98%
8Seven inch touch screen operation, convenient operation
9Protection function, the fan does not start, heating cannot start, and the fan air volume can be adjusted.
four.Preparation instructions