The pulse dedusting two fluid spray dryer is a hot air distributor at the top of the drying chamber through the filter and heater, and the hot air enters the drying chamber evenly in a spiral shape. The feed liquid passes through the filter and is pumped to the centrifugal spray head at the top of the drying chamber, which is sprayed into tiny atomized droplets. It contacts the hot air with a large surface area, and the water evaporates rapidly. It is dried into granular products in a very short time. The wet waste gas captured in the tower bottom and cyclone separator is discharged to the outside by the fan.

Product NamePulse dedusting two fluid spray dryer
Product model: YM-10LMC
Price on this website: 358000
Product brand: Yuming brand
YM-10LMC two fluid spray dryer
1、 Working principle
The air passes through the filter and heater, and enters the hot air distributor at the top of the drying chamber. The hot air enters the drying chamber uniformly in a spiral shape. The feed liquid passes through the filter and is pumped to the centrifugal spray head at the top of the drying chamber, which is sprayed into tiny atomized droplets. It contacts the hot air with a large surface area, and the water evaporates rapidly. It is dried into granular products in a very short time. The wet waste gas captured in the tower bottom and cyclone separator is discharged to the outside by the fan.
2、 Characteristics and Applications
1. The drying speed is fast, and the surface area of the feed liquid is greatly increased by two fluid spray. In the high-temperature airflow, 95-98% of the water can be evaporated instantly, and the drying time is only a few seconds.
2. Suitable for heat sensitive materials. Due to the parallel flow of liquid droplets and hot air, although the temperature of the hot air is high, the material will not overheat when water evaporates.
3. Widely applicable. A large number of materials with significant differences in physical properties are produced using this method. Such as polymers and resins; Dyes and pigments; Ceramics and glass; Rust removers and insecticides; Carbohydrates; Dairy products category; Blood and fish products category; Fertilizers; Organic and inorganic compounds; Wait.
4. The product has good dispersibility, fluidity, and solubility. This is because drying is completed instantly, and the product can maintain uniform fine particles.
5. The production process is simplified and the operation control is convenient. For solutions with a moisture content of 40-60% (up to 90% for special materials), they can be dried into powdered products in one go, without the need for further crushing and screening, reducing production processes and improving product purity. Within a certain range, the particle size, bulk density, and moisture content of the product can be adjusted by changing the operating conditions, making control and management very convenient.
3、 Main technical parameters
◆ Color large touch screen operation, combining fully automatic control and manual control, Chinese and English panel, parameter LCD display.
Real time PID constant temperature control technology, accurate temperature control, heating temperature control accuracy ± 1 ℃.
◆ The spray, drying and collecting device is made of double mirror high-quality 304 stainless steel, and the spray drying room is equipped with an observation port.
◆ With the atomization structure of centrifugal spray, the particle size of powder is normally distributed, and the fluidity is good.
The feeding amount can be adjusted through the feeding peristaltic pump.
◆ Protection function, the fan cannot start and the heater cannot start.
Equipped with air inlet filtration to ensure sample purity.
Equipped with an air pulse filter touch screen, it can set 1-9999 second pulses once to prevent filter blockage and improve sample collection rate. The air at the discharge port is pure.
The dried product has uniform particle size, with over 95% of the dry powder in the same particle size.
1. Inlet temperature ≤ 30-300 ℃
2. Export temperature ＜ 30-140 ℃
3. Water evaporation rate 200-10L/h
4. Two fluid nozzle 1.5mm
5. Heat source: Electricity
6. Electric heating power 36kw, total power: 42kw
7. Dimensions: length x width x height (mm): 3000 x 1400 x 3500, dry powder recovery ≥ 98%
8. Seven inch touch screen operation, convenient operation
9. Protection function, the fan does not start, heating cannot start, and the fan air volume can be adjusted.
4 Preparation instructions