-
Phone
18782066269
-
Address
Shibatan Industrial Zone, Xindu District
Product Categories
- Modified emulsified asphalt equipment
- Sewage treatment equipment
- Resin production line
- Ink and paint production line
- Mixing machine
- High speed disperser
- Sand grinder
- Storage tank
- Spiral conveyor
- Heat exchanger
- High shear emulsifier
- Blender selection parameters
- Other supporting equipment
- Other chemical pressure vessels
- dry mortar production line
- Dry powder mortar equipment
- Environmental dust collector
- Resin production equipment
- Paint equipment | Paint production equipment
- Steel lined PO anti-corrosion series
- PTFE lined anti-corrosion series
- Steel lined PE anti-corrosion series
- Chemical anti-corrosion steel lined plastic pipeline
- Anti corrosion of steel lined PP polypropylene storage tanks
- Sichuan Jinti Yongtong PTFE Anti corrosion Technology Co., Ltd
- Complete set of putty powder equipment
- Other complete sets of chemical equipment
- reaction kettle
Chengdu Xindu Yongtong Machinery Factory
Two blade slurry agitator for reaction kettle
NegotiableUpdate on 12/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Two blade slurry agitator for reaction kettle
Product Details
Introduction to the Two bladed Slurry Stirrer in the Reactor
|
fundamental type
|
Model and Name
|
Sketch Map
|
Operating parameters
|
YongtongCharacteristics of the mixer
|
||
|
DJ:DN
|
V(m/s)
|
μ(Pas)
|
||||
|
Two bladed propeller type
|
YT110
Flat blade propeller type |
|
0.35
~ 0.9 |
1~3
|
<20
|
YTThe 110 mixer mainly operates in a horizontal circumferential flow, and when there is a baffle, it operates as an up and down circulating flow with a relatively simple flow state.
YTThe 120 mixer has axial diversion, radial diversion, and circumferential diversion. YT110YTThe 120 agitator generally operates in laminar flow and is suitable for low-speed mixing of large diameter multilayer materials with low viscosity homogeneity, blending, homogenization, dissolution, crystallization, or high viscosity. |
|
YT120
Inclined blade propeller type |
 |
|||||
|
YT30
Variable cross-section folded blade propeller |
 |
0.35
~ 0.95 |
1~8
|
<10
|
Axial flow pattern, with horizontal circumferential flow and axial flow at low speeds, and radial flow and axial flow at high speeds. Due to the variation in blade cross-section, there is a significant change in the discharge flow rate at each point. A small propeller tilted in the opposite direction to the main propeller enhances the vortex flow at the blade end, resulting in better mixing performance compared to traditional propellersYT120 inclined blade propeller reduces mixing time by 30%. Generally used in combination with multi-layer agitators, it is suitable for mixing, dissolving, suspending solids, crystallizing, and heat transfer operations in non-uniform phases.
|
|
|
YT35
Variable cross-section double folded blade propeller |
 |
0.35
~ 0.95 |
1~4
|
<20
|
Axial flow pattern, the front end of the main blade is equipped with two small blades that are inclined in the opposite direction to the main blade, which can forcibly change the flow direction of the front end of the main blade. There is a strong mixing vortex at the blade tip, which generally operates in the transition flow zone. Suitable for mixing, dispersing, suspending, gas absorption, and heat transfer operations of medium viscosity materials.
|
|
|
YT140
Variable cross-section composite folded blade propeller |
 |
0.3
~ 0.5 |
1~10
|
<5
|
Axial flow type, with a closed composite small propeller at the end of the blade in the radial direction. Under high-speed operation, the blade end can generate intersecting vertical flow, which has a very good mixing effect and generally works in turbulent flow zones. Suitable for mixing, dispersing, gas absorption, suspension, and heat transfer operations of low viscosity materials.
|
|
|
Note: DJ - mixer diameter; DN - inner diameter of container; V - linear velocity of agitator blade end; μ - dynamic viscosity (1Pas=1000cp)
|
||||||
