Touchscreen battery squeezing needle punching integrated machine

Product Overview:

The battery squeezing and needle punching integrated machine is suitable for simulating the situation where various types of batteries are subjected to squeezing and puncture during use, transportation, storage, or disposal of household waste.

The extrusion direction of the extrusion test should follow the following rules: a battery should only be extruded once, and the battery is considered qualified if it does not explode or ignite.

1.For cylindrical batteries, the longitudinal axis of the squeezed battery should be parallel to the two flat plates of the squeezing device;

2.For square and soft pack batteries, only squeeze the wide surface of the battery;

3.For coin or button type batteries, the upper and lower planes of the battery are pressed parallel to the flat plate.

acupunctureThe experiment should be conducted20℃±5Under the environment of ℃, place the battery flat on the fixture and use a diameter of φ3-φ8mmThe corrosion-resistant steel needle10mm/s-40mm/sThe speed penetrates the center position of the battery surface,Maintain any time and observe the test results. If the battery does not explode or catch fire, it is considered qualified.Attachment of battery compression testing machineGB31241-2014Waiting for standards.

According to the standard:

GB 31241-2014，GB/T 8897.4-2008，YD/T 2344.1-2011，GB/T 21966-2008，MT/T 1051-2007，YD 1268-2003，GB/T 19521.11-2005，YDB 032-2009，UL 1642，UL 2054，IEC 62281，IEC 60086

Equipment Technical Specifications:

Squeezing parameters:

1Drive mode: hybrid servo motor drive

2Range of force values:1 ～20kN

3Accuracy of force measurement:0.1N

4Unit Conversion:kg, N, lb

5Squeezing stroke:200mmperhaps300mm

6Force value display:PLCTouch screen display

7Battery Squeezing Head: Standard Squeezing Head, Area≥20cm²

8Squeezing degree: The squeezing pressure reaches13±0.2kN, maintain1min.

9Box material: Inner box made of stainless steel, outer box made of cold-rolled steel plate with spray coating treatment

10Features: The rear of the box is designed with exhaust vents and pressure relief devices, and the box is equipped with lighting fixtures

11Testing space: 300x300x300mm(Long)xwidexHigh)

12Dimensions: Approximately700x800x1830mm(longxwidextall)

13Weight: Approximately220kg

14Power supply:AC380V， 50HZ

Acupuncture technique specifications:

1Steel needle:φ5mm～φ8mmHigh temperature resistant steel needle, length of100mm(Can be specified).

2Acupuncture stroke:200mmperhaps300mm

3Distance of battery clamp:200mm

4Unit Conversion:Kg、N、LB

5Acupuncture speed:10～80mm/s(Can be specified)

6Acupuncture force value: 1～200Kg(Optional)

7Force value display:PLCTouch screen display

8Accuracy of force measurement:±1%

9Drive mode: hybrid servo motor control Adjustable speed and pressure

10Box material: Inner box made of stainless steel, outer box made of cold-rolled steel plate with spray coating treatment

11Features: The rear of the box is designed with exhaust vents and pressure relief devices, and the box is equipped with lighting fixtures

Equipment vulnerability list

Equipment delivery list

{C}1. instructions

{C}2. delivery note

{C}3. Testing machine host1tower

{C}4. Certificate of conformity, warranty certificate