Product Categories

Dongguan Ruili Testing Equipment Co., Ltd

E-mail
ruili@dongguanruili.com
Phone
136-6299-5295
Address
No. 240 Wentang East Road, Dongcheng Street, Dongguan City, Guangdong Province

Power battery needle puncture testing machine

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Power battery needle puncture testing machine

Product Details

Product Purpose:

The battery needle puncture testing machine verifies the safety performance of the battery through needle puncture testing, and determines the experimental results based on real-time test data (such as battery voltage, maximum temperature on the battery surface, and pressure video data). After the needle puncture test, the battery should not ignite, explode, or smoke; It is also an essential testing equipment for battery manufacturers and research institutes.

Product Features

Qc743 old standard requires:

Use a high-temperature resistant steel needle with a diameter of 3mm~8mm, at a speed of 10mm/s~40mmls, to penetrate at least three battery cells from a direction perpendicular to the battery module plates (with the steel needle staying in the battery)

QC743 new standard requirements:

Use a 6mm-o10mm high-temperature resistant steel needle (with a needle tip angle of 60 degrees, a smooth surface, no rust, oxide layer, or oil stains) at a speed of 20-30 mm/s, from the direction perpendicular to the battery plate, until it penetrates three individual batteries (with the steel needle staying in the battery for 1 hour after the test)

QC743 Old Standard Requirement:

With diameter o3mm-8mm high temperatureresistant steel needle, lOmmls~40mms speed, penetrate at least three storage battery monomer from vertical direction of store battery module pole board(steel needle stay in the storage battery)

QC743 New Standard Requirement:

With diameter 6mm-o10mm high temperature resistant steel needle(the angle of needle point is 60 degree, needle surface firish, no corrosion,oxidelayer and oilstin).20mmls-3Ommls speed,from vertical direoction of store battery module pole board, penetrate till hree monomer storage battery(steel needle stay in the storage battery, observe 1h after test)

According to the Standard Basis

GB/T 18332.2-2001 Nickel metal hydride batteries for electric road vehicles

QC/T 743 Lithium ion batteries for electric vehicles

QC/T 744 International standards for metal hydride nickel batteries for electric vehicles, including ISOIIECISAE/JEVA/CEN, as well as testing specifications for major projects related to electric vehicles under the International Standards Association and the 863 Program

QB/T2947.3-2008 Electric Bicycle Batteries and Chargers Part 3

DBI2/T246-2005 Test Standard for Lithium ion Batteries of Electric Bicycles

GB 19521.11-2005 Safety Code for Inspection of Dangerous Characteristics of Lithium Battery Pack Dangerous Goods

GB/T31485-2015 Safety requirements and test methods for power batteries used in electric vehicles

GB/T31486-2015 Requirements and Test Methods for Electrical Performance of Power Batteries for Electric Vehicles

GB/T31467.3-2015 Test code for lithium-ion power battery packs and systems for electric vehicles

GB/T 18332.2-2001 Nickle metal hydride storage battery for electric road vehicle

QC/T743 Lithium ion storage battery for electric vehicle

QC/T744Vehicle power batlery revelant international standards of nickle metal hydride storage battery for electric vehicle(SOVIECISAEUJEVACENetc).international standard association and "863 plan" electric vehicle major specific revelant test specification

QB/T2947.3-2008 Part 3 storage and charger for electric bicycle

DB12/T246-2005 Electric vehicle lithium battery test standard

GB 19521.11-2005Lithium battery pack dangerous goods dangerous property inspection safety specification

GB/T31485-2015 Power storage battery safety requirement and test method for electric vehicle

GB/T31486-2015 Power storage battery safety requirement and test method for electric vehicle

GB/T31467.3-2015Lithium ion power storage battery pack and system test procedure for electric vehicle

Product specifications

Equipment model	Test space (mm)	Machine External Dimension
RL-DZC-2T	200×200x200	W750xD650xH1800mm
RL-DZC-5T	600x600x600	W1000xD900xH2200mm
RL-DZC-9002D	800x800×800	W3000xD1200xH1300mm
RL-DzC-9002T	1000x1000x1000	W3300xD150OxH1500mm

Accessibility Function	Voltage and temperature acquisition, video surveillance system, fire extinguishing system, safety and explosion-proof system, smoke emission system, smoke filtration system Voltage,Temperature acquisition,Camera monitoring system,Sprinkler system, Safety explosion proof system,Smog emission system, Smog filter system
Nail Penetrating Speed	0~80mm/min (adjustable), can be customized to 200mm/min according to requirements 0~80mm/min (Adjustable )，Can customize to 200mm/min according to requirement
Test Space (mm)	200x200x200mm, 500x500x500mm, 800x800x800mm, 1000x1000x1000mm (can be customized according to requirements) Can customize according to requirement
External Dimension	Subject to actual design

select

join in marriage

finger

treetop

Voltage Select	0-10V,0-100V,0-1000v
Temperature Acquisition Range	0~1200°℃
Accuracy of voltage and temperature	±1%FS
Voltage Resolution	1mv
Temperature Resolution	0.1C

host

important

skill

art

finger

treetop

Speed Speed	0~80mm/min (adjustable), can be customized to 200mm/min according to requirements 0~80mm/min ( Adjustable ) , can customize to 200mm/min according to requirement
Needle Penetrating Stroke	0~1000mm range optional
Structure	Vertical/Horizontal type (choose according to actual dimension)
High Temperature Resistant Steel Needle Specification	3mm~$8mm/Diameter $3mm~8mm
Nail Penetrating Method	Horizontal and vertical landscape orientation, portrait
Needle Penetrating Deformation Amount	No (if needed, please choose computer control type)
Nail Penetrating Holding Time	0~99 hours 99 minutes 99 seconds/0~99 hours 99 minutes 99 seconds
Driving Method	Hydraulic
Accuracy of Nail Penetrating Speed	±0.1mm/s
Force Accuracy	±1%

tie

construct

Chamber Body	Vertical or horizontal structure separated from control part, apart with control part
Communication	No (if needed, please choose computer control type)
High Temperature Resistant Steel Needle	Diameter ranging from 3mm to 8mm, can be customized according to requirements for diameters of 3mm to 8mm
Data Acquisition Module	Independent remote acquisition and isolation, multiple voltage, temperature, and current acquisition channels to ensure data accuracy isolation,multiplex voltage, temperature, current acquisition channel, ensure data correct(optional)
Channel Quantity Standard Configuration	2-channel, 4-channel, 8-channel, multiple data acquisition systems (optional) 2channel, 4-channel, 8-channel, multiple data acquisition system (optional)
Camera Monitoring System	The testing area is equipped with a high-definition camera monitoring system, which can be remotely controlled and has explosion-proof function (optional) Test area install high definition video monitoring system,can remote control, explosion proof function(optional)

Standard Configuration	1 set of needle punching host, 1 set of control cabinet, 1 set of high temperature resistant steel needles with a diameter of v3mm~u8mm Nail penetrating main body one set,control cabinet one set,diameter u3mm~u8mm high temperature resistant steel needle one set
Test Clamp	Specific production, customized by sample actual usage conditions
Power Supply Voltage	AC380V 50HZ three-phase five wire system
Usage Environment	0°C~45°℃