Battery combustion testing machine

Product Overview:

This machine is suitable for flame resistance testing of lithium batteries (or battery packs). Drill on an experimental platform with a diameter of102mmPlace a circular hole and a steel wire mesh on top of it. Place the tested battery on the steel wire mesh sieve and install an octagonal steel wire mesh around the sample. Then ignite the burner to heat the sample until the battery explodes or burns out, and time the combustion process.

Meet the standards:

GB/T 31241-2014Safety requirements for lithium-ion batteries and battery packs for portable electronic products

UL 1642:2012Lithium Battery Standard

UN38.3(2012)Recommendations on the Transport of Dangerous Goods - Manual of Tests and Standards, Part 3

IEC62133-2012Safety requirements for batteries and battery packs containing alkaline or non acidic electrolytes

Technical parameters:

1Inner box size:750x750x500mm(Wide)xdeepxHigh);

2Equipment dimensions:900x900x1300mm(Wide)xdeepxHigh);

3、Inner box material:SUS201Stainless steel plate, thickness1.2mm；

4Outer box material: thick1.5mmCold rolled steel plate paint treatment;

5Observation window: size is250x250mmTwo layers of tempered glass, transparent windows equipped with stainless steel mesh;

6Smoke exhaust outlet: with a diameter of100mmLocated at the rear of the box;

7Pressure relief port: opening size200x200mmLocated at the back of the box, when the sample explodes, the pressure relief port will pop open to release the pressure;

8Box door: The single door opens on the left and is equipped with a safety limit switch and an explosion-proof chain on the side. The equipment can only be operated by closing the box door,

Ensure personnel safety;

9Control method:PLCTOUCH SCREEN CONTROLLER

10Bensheng Lamp: The inner diameter of the tube mouth is9.5mm, about100 mm

11、combustionTime:0-99H99，H/M/SUnit switchable

12Test circular hole diameter:102mm

13Experimental mesh screeningspecifications: with a diameter of0.43mmStainless steel wire woven into inches containing20A mesh screen of a grid

14FlamearriveMesh height:38mm

15Octagonal mesh width: The distance between each opposite side is24″（610mm）, octagonal, with movable octagons for easy replacement and disassembly

16Height of octagonal mesh cover:12″(305mm)

17Octagonal cover material:stainless steelNet, with a diameter of0.25mmThe aluminum wire is woven to contain16-18The composition of the grid network

18Combustion gas: methane or liquefied petroleum gas (to be provided by the customer)

19、Equipment weight:160kg

20Power supply:AC220V

21、Power:200W

Equipment installation environment:

1Environmental temperature:0-50℃；

2Relative humidity:45-85%RH；

3Atmospheric pressure:86～106KPa；

4No direct sunlight or direct radiation from other heat sources;

5There is no strong vibration around;

List of main accessories:

Main configuration list

Equipment vulnerability list

Equipment delivery list

{C}1. instructions

{C}2. delivery note

{C}3. Testing machine host1tower

{C}4. Certificate of conformity, warranty certificate