- Phone
-
Address
Xingyuan 1st Road, Chengnan Industrial Park, Baoying County, Jiangsu Province
Product Categories
Baofei Vibration Instrument Factory in Baoying County
Temperature monitoring device
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The WS-2C (YYL) temperature monitor is a simple and efficient tool for on-site equipment monitoring, control, and analysis. It is mainly used for monitoring and protecting large machinery and rotating equipment from excessive vibration during continuous operation. It can avoid equipment damage and personnel injury caused by equipment malfunction and increased vibration amplitude. It is a monitoring instrument for equipment maintenance and upkeep. During user use, control values can be set based on the allowable vibration level of the device. When there is an abnormal phenomenon during the operation of the device, and the vibration value increases or exceeds the set value (SP value), the alarm indicator light will turn on. If the continuous overshoot time exceeds the set delay time
Product Details
WS-2C（YYL）Temperature monitoring device
Operation Instructions:
1. Panel Description
（1) PV1 and PV2 are the first and second channel display windows: normal display of vibration measurement values; Display parameters and parameter value symbols in parameter modification state.
（2) SP2 and SP4 indicator lights: When this indicator light is on, there is output from the corresponding channel of the lower limit relay on the instrument.
（3) SP1 and SP3 indicator lights: When this indicator light is on, there is output from the corresponding channel of the upper limit relay on the instrument.
（7) SET key: Press the key for 1 second to enter the parameter modification state; Press SET again to enter the next parameter value modification state.
（8) Shift key（►）Pressing this key while modifying parameters can move the position of the modified number.
（9) Number reduction key（▼）Number reduction can be achieved in parameter modification, given value modification, or manual adjustment states.
（10) Number increase key（▲）Number increase can be achieved through parameter modification, given value modification, or manual adjustment.
（11) Return key (MAN): When the instrument is in operation, press the (SET) key first and then the (MAN) key to enter the parameter setting state in Table 2. After each parameter modification is completed, press the (SET) key to confirm and automatically switch to the next menu until the setting is exited and the instrument automatically switches to normal operation state. Pressing the SET and MAN keys simultaneously during the parameter setting process can exit the currently set parameters and enter the measurement state.
WS-2C（YYL）Temperature monitoring device
sensor(Input):
ZW-2A temperature vibration integrated probe(Waterproof; wire length)20M)
2. Number of channels: Dual channels
3. Measurement range
Vibration speed:0-1000mm/s (adjustable);
Temperature:0-100 ° C (adjustable)
4. Alarm and control: divided into two stages of alarm: the first stage is warning (SP2, SP4), which controls the output relay to work; The second stage is the alarm (SP1, SP3), which controls the operation of the output relay
5. Warning and alarm setting range: any set value within the measurement range
6Speed value display error: < 1%
7. Output: 0-1000mm/s;0-100°CCorresponding measurement values0―100mA
output
8Relay contact output: AC220V/5A(resistive load) orAC220V/0.3A(inductive load), Normally open (adjustable)
9. Working power supply: 85-240V 50/60Hz
10. External dimensions: Panel Size:160（Long)80mm in height;
Opening size: 152+1×76+1Mm; Depth: 88mm
11. Working environment: a non corrosive gas environment with a temperature range of -10 to 60.0 ℃, a relative humidity not exceeding 85, and a place without strong electromagnetic interference
Similar Product Recommend
